Oil Filter Adapter D1 Spec M20 thread
D1 Spec
Product number:
A040
Manufacturer:
D1 Spec
FITS TO *30mm lowering, SPS alignment*:
Mazda MX-5 NA/NB/NBFL/ND
Product information "Oil Filter Adapter D1 Spec M20 thread"
The oil filter adapter from D1 Spec offers you three ways to connect various display instruments for the interior of the vehicle, such as. Oil pressure instruments or oil temperature instruments. It is screwed directly between the oil filter and engine block. This allows the adapter to remain on the engine block when changing the oil, as only the overlying oil filter is replaced. Thus, the sensors and cables are protected directly in the engine compartment.
Included in the package of the oil filter adapter are two blind plugs to close or expand two of the three openings when not in use. The threads are conical cut and therefore self-sealing! The sensors can not be screwed in until they stop !!! The sealing ring lies in a milled groove and therefore can not slip! The adapter is made of aluminum and can therefore be easily edited!
On a colored anodization is omitted, otherwise it can lead to leaks !! With this product we offer you the simplest, safest and fastest solution for installing additional instruments in your vehicle.
Included in the package of the oil filter adapter are two blind plugs to close or expand two of the three openings when not in use. The threads are conical cut and therefore self-sealing! The sensors can not be screwed in until they stop !!! The sealing ring lies in a milled groove and therefore can not slip! The adapter is made of aluminum and can therefore be easily edited!
On a colored anodization is omitted, otherwise it can lead to leaks !! With this product we offer you the simplest, safest and fastest solution for installing additional instruments in your vehicle.
Thread of the holes for the sensors are 1/8" NPT.
Attention! This oil filter adapter is not compatible with our SPS oil cooling kit, because it has its own oil filter adapter.
Dimensions:
Diameter: 7.3cm x 7.3cm
Thickness: 2,7cm
Max. Sealing surface (outside): 7,3cm
minute Sealing surface (inside): 5,4cm
delivery
Oil filter adapter
2x dummy plugs
1x threaded bolt M20x1,5
1x sealing ring
For an appointment for installation, please contact us at termin@sps-motorsport.com
Skip product gallery
Accessory Items
Temperature sensor APD
€22.22*
The temperature sensor is suitable for water and oil. The sensor has a max. Deviation of 5%. Please pay attention to the imprint "APD" on the old giver. If this is not available, check the other donors or contact us.Compatible with the following Prosport series: BF Performance Series Racing Premium Series Clear lens series Clear Lens Premium Series Digital series HALO series
Resistance values as following:
°C
40
60
80
100
120
Ω
925
438
224
120
68
For an appointment for installation, please contact us at termin@sps-motorsport.com
Oil pressure / fuel pressure sensor for Prosport Premium series
€56.93*
The Prosport oil pressure or fuel pressure sensor has been specially designed for the Premium series and can be used for both. The new plug-in connection with safety clip prevents moisture or dirt from getting between the contacts. The thread size is 1/8 "27 (inches per inch) NPT.The sensor has a maximum deviation of about 1 %.It is ideally suited as a retrofit or replacement sensor.The measuring range is 0 to 10 BAR.With its special Tecknik With this very short thread, it is indispensable for difficult access and space problems! The thread is provided with a sealing tape at the factory and can therefore be used immediately.For an appointment for installation, please contact us at termin@sps-motorsport.com