Versand innerhalb von 24h*
Hotline 06432 6409960
Engine 1,6 NA natural aspirated Stage 2

Engine 1,6 NA natural aspirated Stage 2

€10,286.23 *

Prices incl. VAT plus shipping costs

delivery in approx. 2-6 weeks

  • KM-NA-16-SA-160

If you have any questions about TÜV registration in Austria or Switzerland, please do not hesitate to contact our competent partners in the respective country:

Mail to SPS Partner in Austria (JV Imports)

Mail to SPS Partner in Switzerland (Garage Obrist)

1,6 NA engine for building a natural aspirated car ( ITB kit  required). By choosing... more
Product information "Engine 1,6 NA natural aspirated Stage 2"

1,6 NA engine for building a natural aspirated car (ITB kit required). By choosing the right components you can reach up to 160 HP. For consultation to choose the right components do not hesitate to contact us. When you buy the engine the engine is going to be delivered by carrier to you home or you can pick it up at our shop. Building the engine includes the following steps:


  • Engineblock drilled and fine honed
  • Crankshaft aligned, heaved and fine polished
  • Engine block sealings installing


Cylinder head:

  • Cylinder head dismantle
  • Cylinder head leveled
  • Grind valves new
  • valve seats milled
  • Valves fitted
  • Adjust valves clearance


In the interior if the engine we fit the following parts:



In addition to those parts you get a complete Mazda original sealing kit for the engine. This includes the following parts:


  • 16 valve seals
  • 1 cylinder head cover gasket
  • 1 cylinder head gasket
  • 1 intake manifold gasket
  • 1 exhaust manifold gasket
  • 1 thermostat sealing in the back of the cylinder head
  • Both oil pan sealings
  • All sealings for timing belt covers
  • 1 sealing crankshaft front
  • 2 sealings camshaft
  • 1 sealing crankshaft rear
  • 1 sealing for oilpump
  • 1 sealing for waterpump to engine block
  • 1 sealing for waterpump to side noozle
  • 1 O-ring on the side of the engine for water bypass



Engines are traded on exchange. It is possible, to buy the engine as a do it yourself package, so you get all the parts you need to build the engine on your own. In this case, you have to get all the work on cylinderhead and engine block done by an professional engine builder.


To swap on this engine we also recommend the following applications:

Oil cooler kit

Mishimoto radiator NA

ECU (part of our ITB kit)

Wideband lambda AEM

Hardened engine mounts from the mazdaspeed

Roll bar Extreme + XL Roll bar Extreme + XL
From €699.99 *
Roll Bar Extreme + Roll Bar Extreme +
From €699.99 *