Engine 1,8 NBFL natural aspirated Stage 1
- Order number: KM-NBFL-18-SA-1
If you have any questions about TÜV registration in Austria or Switzerland, please do not hesitate to contact our competent partners in the respective country:
1,8 NBFL engine for building a natural aspirated car. By choosing the right components you can reach up to 170 HP. For consultation to choose the right components do not hesitate to contact us. When you buy the engine the engine is going to be delivered by carrier to you home or you can pick it up at our shop. Building the engine includes the following steps:
Engineblock:
- Engineblock drilled and fine honed
- Crankshaft aligned, heaved and fine polished
- Engine block sealings installing
Cylinder head:
- Cylinder head dismantle
- Cylinder head leveled
- Grind valves new
- valve seats milled
- Valves fitted
- Adjust valves clearance
In the interior if the engine we fit the following parts:
- ACL main bearings
- ACL connection rod bearings
- Continental timing belt kit
- Waterpump
- Spark plugs NGK BKR7EIX
- Supertech piston kit 85,5mm 11:1
- Skidnation reroute kit
- Cometic head gasket 85mm 0,40
- Camshafts VVT naturally aspirated Stage 1
- Thrust bearings
- All timing belt covers
- Both heater hoses
In addition to those parts you get a complete Mazda original sealing kit for the engine. This includes the following parts:
- 16 valve seals
- Oil pan sealings
- 1 sealing behind the cover plate of the timing belt
- 1 sealing VVT camshaft
- 1 sealing exhaust camshaft
- 1 sealing crankshaft front
- 1 sealing crankshaft rear
- 1 gasket intake manifold
- 1 gasket exhaust manifold
- 1 O-ring water pump
- 1 gasket oil strainer
- 1 O-ring thermostat housing
- 1 gasket water pump to engine block
- 1 gasket water pump to noozle
- 1 sealing thermostat rear
- 1 O-ring PCV valve
- 1 gasket cylinder head cover
- 1 gasket cylinder head
- All gaskets for sealing the VVT
Engines are traded on exchange. It is possible, to buy the engine as a do it yourself package, so you get all the parts ou need to build the engine on your own. In this case, you have to get all the work on cylinderhead and engine block done by an professional engine builder.
To swap on this engine we also recommend the following applications: