Top seller
No results were found for the filter!
Link ECU adapter wiring loom CAN Lambda to MX-5... Link ECU adapter wiring loom for connecting various sensors from Link to the ECU, including the Link ECU lambda controller. Can be directly plug and play installed between the ECU and the CAN connection of the lambda controller with a...
€78.28 *
Link ECU CAN Lambdacontroller incl. Bosch 4.9... Link ECU lambda controller including Bosch 4.9 LSU lambda sensor for connecting the lambda sensor to the Link ECU. Link thus offers an easily configurable solution for the users of their control units. Included in the delivery are: 1x...
€484.21 *
Link ECU MX-5 NA 2 Plug 89-95 Link ECU standalone ECU G4X suitable for MX-5 NA, which have 2 plugs on the ECU The control unit is simply inserted into the original control unit housing of the MX-5 and replaces the standard control unit circuit board there. Here is an...
€1,393.85 *
Bosch wideband lambda sensor LSU 4.9 Original Bosch wideband lambda sensor LSU4.9 with a wide range of applications. Ideally suited for use with standalone ECU´s. Also used in the AEM lambda display we offer.
€155.06 *
Hella Superseal connector kit for 2-pin... Superseal connector kit from Hella for 2-pin plug connections. The connector kit is characterized by a secure and watertight connection of the connection, which means that applications outside and in the engine compartment are no...
€7.74 *
Prosport wiring loom for oil pressure sensor... Connection wiring loom suitable for Prosport fuel/oil pressure sensors as a replacement or for connecting a CanChecked. One end of the cable fits directly onto the Prosport oil pressure sensor. The other side is suitable for the...
€13.72 *
Sensor for oil temperature gauge 50-150°C Temperature sensor for VDO oil temperature gauge with 1/8" NPT thread. Measuring range: +50 - +150°C Thread: 1/8" NPT Resistance values: 322.8 - 18.6 ohms Output: 1-pin via ground
€25.66 *
Sensor for VDO Oil pressure gauge 0-5 bar /... VDO oil pressure sensor with a range of 0-5 bar and a warning contact at 0.25 bar. Measuring range: 0-5 bar Thread: 1/8" NPT conical short Resistance values: 10-184 ohms Output: 1-pin via ground Warning contact: 0.25 bar ± 0.15 bar
€101.55 *
D-Sub extension cable 2m Renkforce serial Renkforce serial extension cable with 2m length in beige with potted housing. One side of the cable has a D-SUB plug (male) and the other side has a D-SUB socket (female). Perfect for connecting a serial port standalone ECU to a serial...
€8.88 *
Megalife Track-Day Battery MV-19 Motorsport-proven lithium battery with 25Ah nominal capacity from MEGA-LIFe. The battery can be used in the models MX-5 NA/NB/NBFL/NC and offers a weight saving compared to the original battery in the vehicle used. Technical...
€465.75 *
Ignition Coil Adapterkit 1.6L/1.8L B6/BP SPS Motorsport ignition coil adapter kit suitable for MX-5 NA/NB/NBFL 1.6 and 1.8 liter engines. The adapter kit is used by us to adapt NGK Audi R8 ignition coils (item number U5014) to the engine of the MX-5. In the scope of delivery...
€126.25 *
Transi Productions ECU Standard MX-5 NA 2 Plug... Engine ECU suitable for MX-5 NA with 1.6 liters (2 plugs on the ECU) from Transi Productions. The ECU can be used for all conversions that we also offer in-house. Whether it's a ITB, turbo or supercharger conversion, you are on the safe...
€716.08 *