Megasquirt Basic MS3 NA 96-97 1.8L Kit (3 Plug)

€1,131.30 *

Prices incl. VAT plus shipping costs

delivery in approx. 2-6 weeks

add additional parts

Triggerwheel SPS Motorsport 36-2

€27.31 *

AEM X-Series UEGO wideband Lambda gauge 52mm

€265.00 *

SPS Motorsport intake air temperature sensor

€17.80 *

SPS Motorsport wastegate

€45.10 *

Ignition coil upgrade with TFSI coils

€621.95 *

Order number: BMS39697

If you have any questions about TÜV registration or orders to Switzerland, please do not hesitate to contact our competent partners in the respective country:

Mail to SPS Partner in Switzerland (Garage Obrist)

We also use some MS3 ECUs in our racing cars and the converted private cars of our employees.... more

Close menu

Product information "Megasquirt Basic MS3 NA 96-97 1.8L Kit (3 Plug)"

We also use some MS3 ECUs in our racing cars and the converted private cars of our employees. In this way, we have many positive experiences with the ECUs, which we can now pass on to you and from which you can benefit. In addition, we were able to convince ourselves that the control units meet our high standards. Aftermarket immobilizer remain in their function.

For better starting/cranking we recommend the triggerwheel SPS Motorsport 36-2.

CAUTION!! Before buying, please make sure whether your OEM ECU has 2 or 3 plugs. If this ECU is used on a vehicle with 2 plugs, the control unit will be destroyed!

Hardware features

    Processor: MS3
    Processor MHz: 50
    Processor flash: 1024Kb
    Rocessor RAM: 64Kb
    Coprocessors: -
    Watchdog and P / S LEDs: 2
    Outputs Total: 24
    Injector: 4
    Ignition: 4
    Spare Programmable on / off: 5
    Spare PWM Outputs: Same
    Special / Dedicated: 10
    Inputs Total: 19
    Analog Dedicated: 6
    Analog Spare: 5
    Digital On / Off: 5
    Digital Speed: 2
    Knock: 1
    EGT: 0
    SD Card Slot: Yes
    GPS Support: No.
    iMFD Output to DM-6: No.
    Digital Alternator Control Output: Yes
    Electrical Load Sensing / idle-up: no
    Smart Battery Light Output: No.
    Onboard Wideband Module: No.
    Onboard Baro Sensor: Yes
    Immobilizer Support: No.
    OBD-II: No.
    Backup Power: No.
    VVT Control Output: Yes
    Boost Control Output: Yes
    Idle Output (Hardware frequency): Yes
    Speedometer Output: Yes
    VICS / VTCS Output: Yes
    Cool Fan Output: Yes
    Condenser Fan Output: Yes
    A / C Compressor Output: Yes
    MAP Sensor Input: Yes
    Coolant Temp Input: Yes
    Air Temp Input: Yes
    TPS Input: Yes
    Wideband Input: Yes
    Wideband digital input: no
    Oil Temperature Input: Yes
    Oil Pressure Input: Yes
    EGT input: no
    Flex Input: Yes
    VSS Hall Input: Yes (2)
    VSS VR Input (s): No.
    Clutch Switch Input: Yes
    Neutral Switch Input: no
    Brake Switch Input: no
    TEN terminal input: no
    Knock Sensor Inputs: Yes
    RTC: Yes
    Launch Control Input: Yes
    Tableswitch Input: Yes
    Boost Switch (Hi / Lo): Yes
    A / C Switch Input: Yes
    Additional Input / Output Connectors: 1x37way

Software features

    Fuel Tables: 4, 16x16
    Ignition Tables: 4, 16x16
    AFR tables: 2, 12x12
    Boost Tables: 4, 8x8
    Boost by Gear: Yes
    Traction Control: Yes
    ALS: Yes
    Full A / C Support: Yes
    P / S Support: No.
    Water Injection: Yes
    CEL Infrastructure: Yes
    Advanced CEL Warning: no
    Limp Fashion: Yes
    Advanced Engine Protection: No.

For an appointment for installation, please contact us at termin@sps-motorsport.com