Megasquirt Mini MS3 NA 96-97 1.8L Kit (3 Plug)

We also use some MS3 ECUs in our racing cars and the converted private cars of our employees. In this way, we have many positive experiences with the ECUs, which we can now pass on to you and from which you can benefit. In addition, we were able to convince ourselves that the control units meet our high standards. Aftermarket immobilizer remain in their function. 

For better starting/cranking we recommend the triggerwheel SPS Motorsport 36-2.

CAUTION!! Before buying, please make sure whether your OEM ECU has 2 or 3 plugs. If this ECU is used on a vehicle with 2 plugs, the control unit will be destroyed!

Hardware features

    Processor: MS3
    Processor MHz: 50
    Processor flash: 1024Kb
    Rocessor RAM: 64Kb
    Coprocessors: -
    Watchdog and P / S LEDs: 2
    Outputs Total: 16
    Injector: 4
    Ignition: 2
    Spare Programmable on / off: 2
    Spare PWM Outputs: Same
    Special / Dedicated: 10
    Inputs Total: 12
    Analog Dedicated: 6
    Analog Spare: 1
    Digital On / Off: 2
    Digital Speed: 1
    Knock: 1
    EGT: 0
    SD Card Slot: Yes
    GPS Support: No.
    iMFD Output to DM-6: No.
    Digital Alternator Control Output: Yes (99-05)
    Electrical Load Sensing / idle-up: no
    Smart Battery Light Output: No.
    Onboard Wideband Module: No.
    Onboard Baro Sensor: no
    Immobilizer Support: No.
    OBD-II: No.
    Backup Power: No.
    VVT Control Output: Yes
    Boost Control Output: Yes
    Idle Output (Hardware frequency): Yes
    Speedometer Output: Yes
    VICS / VTCS Output: Yes (99-00)
    Cool Fan Output: Yes
    Condenser Fan Output: Yes
    A / C Compressor Output: Yes
    MAP Sensor Input: Yes
    Coolant Temp Input: Yes
    Air Temp Input: Yes
    TPS Input: Yes
    Wideband Input: Yes
    Wideband digital input: no
    Oil Temperature Input: No.
    Oil Pressure Input: Yes
    EGT input: no
    Flex Input: Yes
    VSS Hall Input: Yes
    VSS VR Input (s): No.
    Clutch Switch Input: Yes
    Neutral Switch Input: no
    Brake Switch Input: no
    TEN terminal input: no
    Knock Sensor Inputs: Yes
    RTC: No.
    Launch Control Input: Yes
    Tableswitch Input: Yes
    Boost Switch (Hi / Lo): No.
    A / C Switch Input: Yes
    Additional Input / Output Connectors: -

 

Software features

    Fuel Tables: 4, 16x16
    Ignition Tables: 4, 16x16
    AFR tables: 2, 12x12
    Boost Tables: 4, 8x8
    Boost by Gear: Yes
    Traction Control: No.
    ALS: No.
    Full A / C Support: Yes
    P / S Support: No.
    Water Injection: Yes
    CEL Infrastructure: Yes
    Advanced CEL Warning: no
    Limp Fashion: Yes
    Advanced Engine Protection: No.

For an appointment for installation, please contact us at termin@sps-motorsport.com