Top seller
No results were found for the filter!
ACL Connecting Rod Bearing B6 1.6 / BP 1.8 The ACL Race series connecting rod shells provide the reliability needed to withstand higher-speed forces. The unique combination of design, metallurgy and technology combines everything to withstand any load. The unique combination of...
From €74.42 *
K1 connecting rod H-shaft B6 / BP 133,00mm H-shaft connecting rod suitable for B6 and BP engines. Made in the USA with one of the most accurate tolerances in the industry. The connecting rods are made up to a 2.5 thousandths of a millimeter. For an appointment for installation,...
€570.16 *
Cometic Cylinder Head Gasket BP 84mm Cometic MLS head gaskets are constructed from multiple layers of stainless steel and contain load-controlled embossing that matches the load distribution throughout the sealing area. This results in an exceptional seal because less...
€170.13 *
Cometic Cylinder Head Gasket BP 85mm Cometic MLS head gaskets are constructed from multiple layers of stainless steel and contain load-controlled embossing that matches the load distribution throughout the sealing area. This results in an exceptional seal because less...
€170.13 *
ACL Main Bearing B6 1.6 / BP 1.8 The main bearing shells of the ACL Race series offer the reliability required to withstand the forces even at higher speeds. The unique combination of design, metallurgy and technology combines everything to withstand any load. The...
From €91.86 *
Temperature sensor APD The temperature sensor is suitable for water and oil. The sensor has a max. Deviation of 5%. Please pay attention to the imprint "APD" on the old giver. If this is not available, check the other donors or contact us. Compatible with the...
€22.22 *
Oil pressure / fuel pressure sensor for... The Prosport oil pressure or fuel pressure sensor has been specially designed for the Premium series and can be used for both. The new plug-in connection with safety clip prevents moisture or dirt from getting between the contacts. The...
€56.93 *
Piston Kit 1,8 BP 83,5mm 9,0: 1 Suitable for Mazda 1.8 Ltr 16V DOHC, 323 / MX-5 (BP engine) Weight (g) 294 Piston protrusion (mm) 0,40- Compression ratio 9.0 Compression height (mm) 30,60 Piston pin diameter (mm) 20 Oversize (mm) 0,50 Volume dome / well (cc) -2 Bore...
€932.41 *
Piston Kit 1,8 BP 84,00mm 9,0: 1 Bore: 84.0mm Oversize: 1.00mm Piston protrusion: -2,7mm Weight: 301g For an appointment for installation, please contact us at termin@sps-motorsport.com
€932.41 *
Piston Kit 1,8 BP 84,5mm 9,0: 1 Bore: 84.5mm Oversize: 1.50mm Piston overhang: -3.4mm Weight: 307g For an appointment for installation, please contact us at termin@sps-motorsport.com
€932.41 *
JE Pistons Piston Ring Set 83,5mm 1st ring (height / width): 1.0mm / 0.126mm 2. Ring (height / width): 1.2mm / 0.142mm Oil control ring (height / width): 2.8mm / 0.128mm Bore 83.5mm For an appointment for installation, please contact us at termin@sps-motorsport.com
€137.16 *
JE Pistons Piston Ring Set 84,00mm 1st ring (height / width): 1.0mm / 0.126mm 2. Ring (height / width): 1.2mm / 0.142mm Oil control ring (height / width): 2.8mm / 0.128mm Bore 84.00mm For an appointment for installation, please contact us at termin@sps-motorsport.com
€137.16 *