Mini MS3 NBFL 01-05 Kit incl. OBD

With the Mini MS3 with OBD II connection for the NBFL, we offer an absolutely legal solution for public road traffic. Due to the ability of the control unit to connect to the NBFL's OBD system, the control unit can be read out like an original control unit and output error codes. The OEM immobilizer remains in it´s function. 

THIS IS THE ONLY ECU THAT IS INCLUDED IN OUR TÜV CERTIFICATES

Please contact us before using the car, as this ECU has a special firmware installed that is not compatible with standard basemaps!

Hardware features

    Processor: MS3
    Processor MHz: 50
    Processor flash: 1024Kb
    Rocessor RAM: 64Kb
    Coprocessors: -
    Watchdog and P / S LEDs: 2
    Outputs Total: 24
    Injector: 4
    Ignition: 4
    Spare Programmable on / off: 5
    Spare PWM Outputs: Same
    Special / Dedicated: 10
    Inputs Total: 19
    Analog Dedicated: 6
    Analog Spare: 5
    Digital On / Off: 5
    Digital Speed: 2
    Knock: 1
    EGT: 0
    SD Card Slot: Yes
    GPS Support: No.
    iMFD Output to DM-6: No.
    Digital Alternator Control Output: Yes
    Electrical Load Sensing / idle-up: no
    Smart Battery Light Output: No.
    Onboard Wideband Module: No.
    Onboard Baro Sensor: Yes
    Immobilizer Support: No.
    OBD-II: Yes
    Backup Power: No.
    VVT Control Output: Yes
    Boost Control Output: Yes
    Idle Output (Hardware frequency): Yes
    Speedometer Output: Yes
    VICS / VTCS Output: Yes
    Cool Fan Output: Yes
    Condenser Fan Output: Yes
    A / C Compressor Output: Yes
    MAP Sensor Input: Yes
    Coolant Temp Input: Yes
    Air Temp Input: Yes
    TPS Input: Yes
    Wideband Input: Yes
    Wideband digital input: no
    Oil Temperature Input: Yes
    Oil Pressure Input: Yes
    EGT input: no
    Flex Input: Yes
    VSS Hall Input: Yes (2)
    VSS VR Input (s): No.
    Clutch Switch Input: Yes
    Neutral Switch Input: no
    Brake Switch Input: no
    TEN terminal input: no
    Knock Sensor Inputs: Yes
    RTC: Yes
    Launch Control Input: Yes
    Tableswitch Input: Yes
    Boost Switch (Hi / Lo): Yes
    A / C Switch Input: Yes
    Additional Input / Output Connectors: 1x37way

 

Software features

    Fuel Tables: 4, 16x16
    Ignition Tables: 4, 16x16
    AFR tables: 2, 12x12
    Boost Tables: 4, 8x8
    Boost by Gear: Yes
    Traction Control: Yes
    ALS: Yes
    Full A / C Support: Yes
    P / S Support: No.
    Water Injection: Yes
    CEL Infrastructure: Yes
    Advanced CEL Warning: no
    Limp Fashion: Yes
    Advanced Engine Protection: No.