Top seller
No results were found for the filter!
Transi Productions speedo module MX-5 NA/NB/NBFL Electronic speedometer sensor unit from Transi Productions for use in transmission conversions that do not have a direct speed sensor installed on the transmission (e.g. BMW transmission swap). Also suitable for all types of gear ratio...
€106.67 *
EGT kit MX-5 NA/NB/NBFL Sensor kit for exhaust gas temperature for use in combination with MS3 ECU´s suitable for MX-5 NA/NB/NBFL. With the kit it is possible to feed the exhaust gas temperature values into the standalone ECU via the temperature sensor used....
From €142.17 *
Link ECU CAN Lambdacontroller incl. Bosch 4.9... Link ECU lambda controller including Bosch 4.9 LSU lambda sensor for connecting the lambda sensor to the Link ECU. Link thus offers an easily configurable solution for the users of their control units. Included in the delivery are: 1x...
€484.21 *
Bosch wideband lambda sensor LSU 4.9 Original Bosch wideband lambda sensor LSU4.9 with a wide range of applications. Ideally suited for use with standalone ECU´s. Also used in the AEM lambda display we offer.
€155.06 *
Prosport wiring loom for oil pressure sensor... Connection wiring loom suitable for Prosport fuel/oil pressure sensors as a replacement or for connecting a CanChecked. One end of the cable fits directly onto the Prosport oil pressure sensor. The other side is suitable for the...
€13.72 *
Sensor for oil temperature gauge 50-150°C Temperature sensor for VDO oil temperature gauge with 1/8" NPT thread. Measuring range: +50 - +150°C Thread: 1/8" NPT Resistance values: 322.8 - 18.6 ohms Output: 1-pin via ground
€25.66 *
Sensor for VDO Oil pressure gauge 0-5 bar /... VDO oil pressure sensor with a range of 0-5 bar and a warning contact at 0.25 bar. Measuring range: 0-5 bar Thread: 1/8" NPT conical short Resistance values: 10-184 ohms Output: 1-pin via ground Warning contact: 0.25 bar ± 0.15 bar
€101.55 *
Idle control valve kit for ITB MX-5 NA/NB/NBFL Kit specifically developed by SPS Motorsport for idle control on MX-5 NA/NB/NBFL, which are equipped with a Jenvey ITB system. With our special system, the cold start behavior, which can be a bit rough with ITB modifications, is...
€233.18 *
SPS Motorsport intake air temperature sensor Intake air temperature sensor from our turbo kits. We also use this sensor in all racing cars and also in the private, remodeled cars of our employees. The sensor fits Plug and Play into our turbo piping. The intake air temperature...
€17.80 *
SPS Motorsport throttle position sensor Sensor for determining the throttle position. We use the sensor even in conversions and in racing cars, where it has proven itself well. Excluding adapter plate for mounting the sensor to the throttlebody. Can be ordererd separately. For...
€98.64 *