Oil Filter Adapter D1 Spec 3/4" thread

The oil filter adapter from D1 Spec offers you three ways to connect various display instruments for the interior of the vehicle, such as. Oil pressure instruments or oil temperature instruments. It is screwed directly between the oil filter and engine block. This allows the adapter to remain on the engine block when changing the oil, as only the overlying oil filter is replaced. Thus, the sensors and cables are protected directly in the engine compartment.

Included in the package of the oil filter adapter are two blind plugs to close or expand two of the three openings when not in use. The threads are conical cut and therefore self-sealing! The sensors can not be screwed in until they stop !!! The sealing ring lies in a milled groove and therefore can not slip! The adapter is made of aluminum and can therefore be easily edited!

On a colored anodization is omitted, otherwise it can lead to leaks !! With this product we offer you the simplest, safest and fastest solution for installing additional instruments in your vehicle.

Thread of the holes for the sensors are 1/8" NPT. 

When You install this oil filter adapter, the stock oil filter will not fit any longer. We have a shorter oil filter in our program which we recommend as an accessoire.

Dimensions:

  Diameter: 7.3cm x 7.3cm
    Thickness: 2,7cm
    Max. Sealing surface (outside): 7,3cm
    minute Sealing surface (inside): 5,4cm

delivery

    Oil filter adapter
    2x dummy plugs
    1x threaded bolt 3/4" 16 UNF
    1x sealing ring