Top seller
No results were found for the filter!
NEW
Xtreme Clutch Twin Disc clutch & flywheel kit... The ultimate system for racing! With this Twin Disc clutch from Xtreme Clutch, a slipping clutch in your racecar is a thing of the past. Thanks to the special twin disc design, the clutch can withstand up to 1200Nm on your MX-5, which...
€1,734.26 *
NEW
Hardrace brake master cylinder stopper MX-5... Hardrace stopper for master brake cylinder suitable for MX-5 NB/NBFL. By supporting the master cylinder, the stopper prevents the bulkhead in which the master cylinder is attached from bending. The result is a better controllable brake...
€75.74 *
NEW
Hardrace lower strut front axle MX-5 NB/NBFL Hardrace strut on the front axle suitable for MX-5 NB/NBFL. The 4-point strut is mounted on the front axle to stiffen the vehicle and avoid flexing.
€185.45 *
NEW
Hardrace rear lower control arm set MX-5 NB/NBFL Hardrace rear lower control arm set suitable for the MX-5 NB/NBFL. The set consists of both lower wishbones (left and right) including matching, adjustable sway bar end links and fastening screws. Thanks to the tubular design, the...
€926.76 *
NEW
Hardrace front lower control arm set MX-5 NB/NBFL Hardrace front lower control arm set suitable for the MX-5 NB/NBFL. The set consists of both lower wishbones (left and right) including matching, adjustable sway bar end links and fastening screws. Thanks to the tubular design, the...
€926.76 *
NEW
Screw plug for lambda sensor fitting M18x1,5 Screw plug in M18x1.5 for closing unnecessary lambda sensor threads. The plugs are made of V2A.
€5.06 *
Running Gear Kit Energy Suspension MX-5... Suspension Bushing Set front and rear axle for Mazda MX-5 NA/NB/NBFL, for track purpose, Shore durometer 70A Hyper-Flex System; Red; Incl. Front and Rear Control Arm Bushing; Performance Polyurethane; Energy's Hyper-Flex(TM) is superior...
€454.46 *
Running Gear Kit Energy Suspension MX-5... Suspension Bushing Set for all wishbones of front and rear axle for Mazda MX-5 NA/NB/NBFL, for street purpose, Shore durometer 70A with graphite content for lubrication property Hyper-Flex System; Black; Incl. Front & rear Control Arm...
€454.46 *
Adapter wiring loom for VVT swap This complete wiring kit converts your MX-5's wiring harness into a plug-and-play 1.8 VVT wiring harness. CAUTION! Can only be used with a standalone ECU! This kit does not include a solution for the ignition wiring harness. Here we...
From €48.47 *
10% Saved
MS Labs Drive by Wire Modul MS Labs Drive by Wire module for using an electronically controlled throttle body in combination with an MS3. Using an electronically controlled throttle body offers many advantages over a conventional throttlebody. For example, the idle...
€417.69 * €464.10 *
Turbosmart Blowoff valve 25mm Kompact Plumb Back Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV....
€133.36 *
Stud M10 for turbo High temperature M10x1.5 or M10x1.25 stud, ideally suited for fastening the turbocharger to the manifold and the turbo elbow to the turbocharger. The studs are an integral part of our turbo kits and are used successfully on the road as...
€9.10 *