Skip to main content Skip to search Skip to main navigation

OS Giken Super Lock LSD Limited Slip Differential MX-5 ND 2.0L Automatic / Abarth 124 Spider

Product information "OS Giken Super Lock LSD Limited Slip Differential MX-5 ND 2.0L Automatic / Abarth 124 Spider"

The OS Giken Super Lock LSD for the Mazda MX-5 ND 2.0L Automatic and the Abarth 124 Spider uses the patented pressure ring design that allows for smooth, progressive locking. This design is a spline-through-side-gear design that allows for fitment of more friction plates (up to 2x as many as competitors versions).

All components are chemically heat treated for maximum durability and are constructed from a high-grade steel alloy.

Gears are raw-forged for maximum strength.

Clutch disks are precision-machined simultaneously on both sides to extremely tight tolerances resulting in minimal warpage.

LSD case is machined from a single billet piece to ensure uniformity.

The OS Giken LSD standard spec (Spec-S) allows for low preload while still retaining a fully progressive 100% lock capability. Operation is quiet and the progressive locking allows for smooth predictable locking. When replacing an open diff, equipping an OS Giken LSD will completely improve the driving experience while maintaining everyday drivability.

If your vehicle delivers significantly more power, we offer additional tuning services for your new/used limited-slip differential through our supplier. Alternatively, you can order a limited-slip differential pre-tuned to your individual requirements. (Spec-X)

More power typically means more kick to the differential. We have the ability to speed up or slow down differential action to allow the vehicle to achieve maximum traction. Initial torque can be adjusted by using thicker / thinner cone springs.

Lock progression timing can be adjusted by using stiffer / weaker pressure ring springs, allowing the progression of full lock to be fine-tuned to the vehicle/driver.

Ramp angles can be customized by swapping the pressure ring and iron cross for even more tuning possibilities.

For proper function and maximum longevity, OS Giken recommends using their 250R differential oil, which can be found as an accessory under the product description.

- Ramps - 25/35 (1.5-way)

- Lock Timing – 336

- Total Plates - 20

- Preload - 10S

Skip product gallery

Accessory Items

OS Giken 250R Differential Oil 80W250 GL-5 1L
The OS-250R was specifically formulated to provide maximum performance and smooth comfort for the OS Giken Super Lock LSD. Lots of testing was done to achieve the appropriate formula needed for the LSD to be smooth, be quiet, and endure the rigors of a racing environment. SAE Rated at 80W-250 GL-5, it is the top choice by race teams for protection and durability, yet maintains streetlike-driveability. Size: 1 Liter CanOil filling quantities: NA small diff: 0.65L NA / NB / NBFL large diff: 1.0L NC Diff: 0.7L ND Diff: 0.6L / with OS Giken Diff Rear Cover: 1,2L

€36.95*
OS Giken Differential Cover MX-5 ND 2.0L
The OS Giken expanded rear differential cover for the Mazda MX-5 ND 2.0L is made of cast aluminum and is designed to aid in additional oil capacity. Stock capacity is 0.6L of differential oil and has been found to be inadequate for heavy track abuse which leads to frequent fluid changes. Effectively doubling the oil capacity has proven to extend that oil change interval and will aid in improving the long-term health of the differential internals as well as the associated bearings and seals. The cover is dimensionally identical to the OEM unit for precise fitment and retainment of the OEM side bearing tolerance. It also has additional ports to aid installation of a differential cooler as well as a temperature sensor for data acquisition. -Increases the total fluid capacity to 1.2L compared to the OEM cover of 0.6L -Includes (2) 3/8-NPT port plugs -Includes (1) 1/8-NPT port plugs -Reuses factory drain/fill bolts and upper breather assembly from OEM cover -Factory fasteners are reused. -Direct install for OS Giken LSDs. No additional clearance needed to the cover for install.

€610.03*