SPS Supercharger Kit MX-5 NC

Single Registration at SPS

€7,899.99*

Prices incl. VAT plus shipping costs

Delivery time 2-6 weeks

Intercooler

Standard

Upgrade

Kompressor

Rotrex C30-84 with 80mm Pulley

Rotrex C38-81 with 80mm Pulley

Product number: KKIT-NC-C3084-SLLK

Product information "SPS Supercharger Kit MX-5 NC"

All products, as well as the Superchargerkit offered here, are developed by SPS Motorsport on the racetrack, adapted to the road and constantly improved. We place utmost importance on the quality of the installed parts and their function.

Development
All Supercharger kits are configured and packed in our house. We use all products in our vehicles.
It was important to us in the development of the Supercharger kits that on the one hand they meet the requirements of our customers, the power development and the optics in the engine compartment are as close to the production as possible. All Superchargerkits that we can distribute in our house registered and accepted.
We use the best components of the scene in our eyes.
The kit comes complete including matching basemap.

Upgrade
All of our Supercharger kits are designed to be easily upgradeable. Of course, we provide the necessary support with a corresponding upgrade and will gladly advise you.

TÜV registration

⚠️ This set can be combined with these exhaust systems:

Friedrich Motorsport Group AFox/SPS Group A

For other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

Support
All Supercharger kits sold by us receive lifelong support. Since we drive and use the products ourselves, as well as on the racetrack, we can help with almost any problem. You have questions, ask us!

Performance

C30-84 260hp on stock engine
C38-81 400hp (only in combination with a forged engine)

Components
Original Rotrex Supercharger incl. Matching connection accessories
KMX Hardpipe boost pressure piping
efficient intercooler
KMX Airbox
SPS Motorsport 700CC Injectors (calibrated and tested)
mounting material

For safe use we recommend the following components:

- Cooling Kit (see at accessory items)

- Clutch ( see at accessory items )

According to empirical values, registration amounts to approximately €1000, and the tuning amounts to approximately €1000. Please ask for installation costs via the inquiry form.

Accessory Items

SPS Motorsport Group A duplex exhaust system for MX-5 NC

SPS logo: without SPS laserlogo | Tip: Type 25 1x90mm

Our SPS Motorsport Group A duplex exhaust system replaces the original rear and front silencers. The outer diameter of the piping is 63.5 mm. The systems are based on the absorption principle, meaning that perforated pipes run through the silencers. This results in lower exhaust back pressure and therefore an increase in power and torque. Compared to the standard system, it produces a deeper and more powerful sound. 1.8L Duratec 126HP 93kW / 2.0L Duratec 160HP 118kW Stainless steel With EC type approval To schedule an installation appointment, please contact us at info@sps-motorsport.com

€1,149.99*

Single Registration at SPS

Exhaust manifold incl. catalytic converter MX-5 1.8L NC

We finally have our own manifolds! You get a complete stainless steel manifold kit including 400 cells catalytic converter suitable for the 1.8L MX-5 NC. The kit can later be registered in our workshop. So you get a completely legal solution to give your exhaust system the finishing touch! The parts certificate also covers our exhaust manifold with catalytic converter in combination with the SPS Motorsport Group A exhaust system. A separate test including noise measurement during TÜV registration is required for use with other exhaust systems. This test has to be passed. The manifold & catalytic converter combination is directly suitable for your OEM or Friedrich Motorsport cat-back exhaust system. With this kit you get the following components: Stainless steel exhaust Manifold suitable for MX-5 NC Specially adapted catalytic converter pipe with 400 cells catalytic converter Heat protection tape for winding the manifold (please so that the welded label is still legible) 10x metal cable ties to attach the heat protection tape to the manifold 1x exhaust manifold gasket 1x gasket suitable for the lower exhaust flange in the direction of the exhaust system 7x copper nuts M10x1.5 (for mounting the manifold on the engine) Mounting material for connecting the lower exhaust flange towards the exhaust system TÜV registration⚠️ This set can be combined with these exhaust systems:Friedrich Motorsport Group AFox/SPS Group AFor other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

€1,999.00*

Single Registration at SPS

Exhaust manifold incl. catalytic converter MX-5 2.0L NC

We finally have our own manifolds! You get a complete stainless steel manifold kit including 400 cells catalytic converter suitable for the 2.0L MX-5 NC. The kit can later be registered in our workshop. So you get a completely legal solution to give your exhaust system the finishing touch! The parts certificate also covers our exhaust manifold with catalytic converter in combination with the SPS Motorsport Group A exhaust system. A separate test including noise measurement during TÜV registration is required for use with other exhaust systems. This test has to be passed. The manifold & catalytic converter combination is directly suitable for your OEM or Friedrich Motorsport cat-back exhaust system. With this kit you get the following components: Stainless steel exhaust Manifold suitable for MX-5 NC Specially adapted catalytic converter pipe with 400 cells catalytic converter Heat protection tape for winding the manifold (please so that the welded label is still legible) 10x metal cable ties to attach the heat protection tape to the manifold 1x exhaust manifold gasket 1x gasket suitable for the lower exhaust flange in the direction of the exhaust system 7x copper nuts M10x1.5 (for mounting the manifold on the engine) Mounting material for connecting the lower exhaust flange towards the exhaust system TÜV registration⚠️ This set can be combined with these exhaust systems:Friedrich Motorsport Group AFox/SPS Group AFor other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

From €1,999.00*

Details

Xtreme Clutch Clutch kit MX-5 NC 5 speed

Clutch kit suitable for MX-5 NC (5 speed) with performance increase. The clutches are designed in 3 stages to make it easier for you to choose the right clutch for your vehicle. The different stages are intended for the following uses: Stage 1: Organic clutch disc with reinforced pressure plate for use in turbo conversions on stock engines (up to 250hp) and all types of natural aspired engines, not suitable for race use on slicks Stage 2: Organic clutch disc with extra reinforced pressure plate for use in turbo conversions with forged engines up to 1.3 bar boost pressure (330 hp). Clutch engagement is more agressive and ruff. For conversions with more power than specified above, we generally recommend the conversion to the 6-speed gearbox of the MX-5 NC with the appropriate clutch. The scope of delivery includes: clutch disc pressure plate release bearing pilot bearing Centering mandrel for centering the clutch

From €649.00*

Details

Xtreme Clutch Clutch kit NC 6 speed

Clutch kit suitable for NC 6 speed with performance increase. The clutches are designed in 3 stages to make it easier for you to choose the right clutch for your vehicle. The different stages are intended for the following uses: Stage 1: Organic clutch disc with reinforced pressure plate for use in turbo conversions on stock engines (up to 250hp) and all types of natural aspired engines, not suitable for race use on slicks Stage 2: 6 pad ceramic clutch disc with reinforced pressure plate for use in turbo conversions with forged engines up to 1.3 bar boost pressure (330 hp). Clutch engagement is more agressive and ruff. Stage 3: ceramic clutch disc in racing configuration with reinforced pressure plate for use in turbo conversions with forged engines above 1.3 bar boost pressure (up to 390 hp). Clutch engagement is more agressive and ruff. The scope of delivery includes: clutch disc pressure plate release bearing pilot bearing Centering mandrel for centering the clutch

From €523.99*

Details

SPS Motorsport Oil Cooling Kit NC L8/LF MZR

Oil cooler kit with integrated in the adapter plate thermostat from SPS Motorsport suitable for L8/LF MZR engines. It's the oil cooler kit that we trust in our racing cars and our converted private cars. We have extensively tested it on the racetrack and on the road.Scope of delivery includes:Oil coolerOil cooler holder for attachment to the screw connection of the steering gearOil cooler hoses Oil filterSandwich plate with outlets to the oil cooler hoses and integrated thermostat (The thermostat opens at 74°C and reaches its full opening at 80°C)For an appointment for installation, please contact us at termin@sps-motorsport.com

€649.99*

Cooling package MX-5 NC

Cooling package suitable for Mazda MX-5 NC 1.8 and 2.0 liter engine from SPS Motorsport. The cooling package contains a SPS radiator and a SPS Motorsport oil cooler kit. No matter whether you like to move your vehicle quickly on the road, like to drive track days or races, or just want to be prepared for the hot summer. With our cooling package you are on the safe side to prevent cooling problems with cooling water and engine oil! With our cooling packages, we rely on years of experience on the racetrack and countless customers who use this constellation on the road without any problems. No matter whether you drive a NA, NB, NC or ND, we have put together the right cooling packages for your vehicle, which we are always happy to recommend to customers. In our opinion, we use the best components from the scene for these kits.

€859.00*