Skip to main content Skip to search Skip to main navigation

Differential parts package MX-5 NA 115hp (small differential)

Product information "Differential parts package MX-5 NA 115hp (small differential)"

Full parts package for differentials suitable for MX-5 ND 1.5L. You will receive all parts needed to set up a completely revised, cleaned, newly stored and re-sealed differential. Only Mazda original components are used for this. These include:

  • Both bevel gear bearings
  • Adapter sleeve
  • Sealings of the bevel gear and differential output in the direction of the drive shafts
  • Nut and washer for fastening the flange of the cardan shaft
  • Differential suspension bearing (Mazdaspeed)
  • Differential body bearing

Work on the differential, which should be done by yourself or a professional gearbox expert, includes:

  • Disassembling and cleaning differential rear
  • Differential body remove from differential bell and cleaning
  • Bevel gear remove from differential body and cleaning
  • All Simmerrings renew
  • Assemble differential with new oil seals and bearings, paying attention to the tightening torques of the components
  • Backlash measuring of the differential, corrections of the shims made if necessary
  • Finally, front differential body painting with black gloss

In addition to the outdated differential, you can select different differential locks above.

If you are searching for a full differential, which is assembled by us, this is the right page for you

Skip product gallery

Accessory Items

Giselwerks Differential Housing with reinforced arms
Rear part of the differential housing in exchange. In the arms, where the bearings are inserted, 3mm aluminum panels are welded with the TIG welding process to eradicate and reinforce the arms as a natural weak point of the differential. Please send us your used differential case.We also strengthened the differentials of our racing cars, so the system was developed by us for the racetrack. Now you can apply it, whether it's for the road or for the racetrack.For an appointment for installation, please contact us at termin@sps-motorsport.com

€328.08*