CANchecked Drehknopf / MFD15 Encoder

With this multifunction display, you won’t miss any values – everything is visible at a glance! New Features WLAN Connect via smartphone for configuring display, widgets, sensors, and updates Improved graphics with enhanced anti-aliasing Two side buttons directly on the display – no need to route cables or drill for a rotary knob Widgets adjustable with greater precision New warning popup functions 6 analog inputs instead of 4 Optional logging via smartphone Freely configurable CAN bus protocol (TRI files as with MFD28/32) CAN bus switching / analogue forwarding for specific ECUs Key Features from Generation 1 1.5" OLED display with standard 52 mm round instrument dimensions (like VDO gauges) Ultra-flat design – only 12.5 mm deep Perfect integration into the vehicle interior thanks to adapter ring for dashboard air vent bezel Up to eight different display windows freely configurable via WLAN Connect and smartphone ECU values can be displayed (connection via OBD2 port, cable included) Up to 64 sensors readable, queried like manufacturer diagnostic tools 6 analog inputs for 0–5V or NTC sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature with adapter, boost pressure, ethanol sensor with license upgrade, oil temperature, water temperature) Up to six sensors/values simultaneously in one display window Integrated LED shift light/warning lamp Customizable minimum, maximum, and popup functions for exceeding or undershooting warning values Built-in shift light Operates via OBD2, UDS, or standalone with analog sensors Online logging function Performance meter (measures e.g. 0–100 km/h and 100–200 km/h times – switchable to mph) Data Displayed (depending on vehicle) Temperatures: engine coolant, intake air, exhaust gas, transmission Pressures: boost, ambient, oil Lambda/Mixture: target/actual lambda, short-term lambda trim, long-term lambda trim, MAF, engine load, torque Driver dynamics: brake pressure, vehicle speed, throttle angle/pedal position Other values: RPM, ignition timing, gear, battery voltage, cylinder-specific ignition retardation Analog inputs: additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust gas temperature, ethanol sensor (Flex Fuel), and more Included in Delivery CANchecked MFD15 GEN 2 OBD2 OLED Multifunction Display Vehicle-specific mounting bezel Quickstart guide OBD2 cable Connector B (6-pin) Connector C (12-pin) 20 cm pre-crimped wiring harness for power supply, CAN bus, analog inputs, 5V, and sensor ground Pins for self-crimping Two 1K resistors (for pull-up with NTC sensors)

With this multifunction display, you won’t miss any values – everything at a glance! New Features WLAN Connect via smartphone for configuring display, widgets, sensors, and updates Improved graphics with enhanced anti-aliasing Two side buttons directly on the display – no need to route cables or drill for a rotary knob Widgets adjustable with greater precision New warning popup functions 6 analog inputs instead of 4 Optional logging via smartphone Freely configurable CAN bus protocol (TRI files as with MFD28/32) CAN bus switching / analogue forwarding for specific ECUs Key Features from Generation 1 1.5" OLED display with standard 52 mm round instrument dimensions (like VDO gauges) Ultra-flat design – only 12.5 mm deep Perfect integration into the vehicle interior thanks to adapter ring for dashboard air vent bezel Up to eight different display windows freely configurable via WLAN Connect and smartphone ECU values can be displayed (connection via OBD2 port, cable included) Up to 64 sensors readable, queried like manufacturer diagnostic tools 6 analog inputs for 0–5V or NTC sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature with adapter, boost pressure, ethanol sensor with license upgrade, oil temperature, water temperature) Up to six sensors/values simultaneously in one display window Integrated LED shift light/warning lamp Customizable minimum, maximum, and popup functions for exceeding or undershooting warning values Built-in shift light Operates via OBD2, UDS, or standalone with analog sensors Online logging function Performance meter (measures e.g. 0–100 km/h and 100–200 km/h times – switchable to mph) Data Displayed (depending on vehicle) Temperatures: coolant, intake air, exhaust gas, transmission Pressures: boost, ambient, oil Lambda/Mixture: target/actual lambda, short-term lambda trim, long-term lambda trim, MAF, engine load, torque Driver dynamics: brake pressure, vehicle speed, throttle angle/pedal position Other values: RPM, ignition timing, gear, battery voltage, cylinder-specific ignition retardation Analog inputs: additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust gas temperature, ethanol sensor (Flex Fuel), and more Included in Delivery CANchecked MFD15 GEN 2 OBD2 OLED Multifunction Display Vehicle-specific mounting bezel Quickstart guide OBD2 cable Connector B (6-pin) Connector C (12-pin) 20 cm pre-crimped wiring harness for power supply, CAN bus, analog inputs, 5V, and sensor ground Pins for self-crimping Two 1K resistors (for pull-up with NTC sensors)