CANchecked MFD15 OBD2 MX-5 NC Gen2
Product information "CANchecked MFD15 OBD2 MX-5 NC Gen2"
With this multifunction display, you won’t miss any values – everything at a glance!
New Features
- WLAN Connect via smartphone for configuring display, widgets, sensors, and updates
- Improved graphics with enhanced anti-aliasing
- Two side buttons directly on the display – no need to route cables or drill for a rotary knob
- Widgets adjustable with greater precision
- New warning popup functions
- 6 analog inputs instead of 4
- Optional logging via smartphone
- Freely configurable CAN bus protocol (TRI files as with MFD28/32)
- CAN bus switching / analogue forwarding for specific ECUs
Key Features from Generation 1
- 1.5" OLED display with standard 52 mm round instrument dimensions (like VDO gauges)
- Ultra-flat design – only 12.5 mm deep
- Perfect integration into the vehicle interior thanks to adapter ring for dashboard air vent bezel
- Up to eight different display windows freely configurable via WLAN Connect and smartphone
- ECU values can be displayed (connection via OBD2 port, cable included)
- Up to 64 sensors readable, queried like manufacturer diagnostic tools
- 6 analog inputs for 0–5V or NTC sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature with adapter, boost pressure, ethanol sensor with license upgrade, oil temperature, water temperature)
- Up to six sensors/values simultaneously in one display window
- Integrated LED shift light/warning lamp
- Customizable minimum, maximum, and popup functions for exceeding or undershooting warning values
- Built-in shift light
- Operates via OBD2, UDS, or standalone with analog sensors
- Online logging function
- Performance meter (measures e.g. 0–100 km/h and 100–200 km/h times – switchable to mph)
Data Displayed (depending on vehicle)
- Temperatures: coolant, intake air, exhaust gas, transmission
- Pressures: boost, ambient, oil
- Lambda/Mixture: target/actual lambda, short-term lambda trim, long-term lambda trim, MAF, engine load, torque
- Driver dynamics: brake pressure, vehicle speed, throttle angle/pedal position
- Other values: RPM, ignition timing, gear, battery voltage, cylinder-specific ignition retardation
- Analog inputs: additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust gas temperature, ethanol sensor (Flex Fuel), and more
Included in Delivery
- CANchecked MFD15 GEN 2 OBD2 OLED Multifunction Display
- Vehicle-specific mounting bezel
- Quickstart guide
- OBD2 cable
- Connector B (6-pin)
- Connector C (12-pin)
- 20 cm pre-crimped wiring harness for power supply, CAN bus, analog inputs, 5V, and sensor ground
- Pins for self-crimping
- Two 1K resistors (for pull-up with NTC sensors)
Skip product gallery
Accessory Items
Assembly set for CANchecked MX-5 NC and ND
€69.20*
Assembly set for CANchecked Displays for MX-5 NC and ND to install engine oil temperature. With this assembly set, the engine oil temperature can be fed into the CANchecked module via an analog input. If this set is not used, the CANchecked Display shows an implausible value for engine oil temperature.
The set includes a modified oil drain plug with 1/8 "NPT thread including aluminium sealing ring, the matching oil temperature sensor and connection cable to the CANchecked display.
Engine oil drain plug with sensorhole 1/8"NPT
From
€26.88*
Drain plug for engine oil with pre-drilled sensor hole in 1/8 "NPT. Fits MX-5 NA/NB/NBFL/NC and ND. Usually the 115 PS NAs have the screws with a cone, all others have the screw variant without a cone. Before ordering, however, you should definitely check which variant is required in order to be able to rule out incorrect orders.
1/8 "NPT is a common dimension for temperature sensors, but the sensor should also be checked for the correct thread before ordering.
Prosport wiring loom for oil pressure sensor for premium series
€13.72*
Connection wiring loom suitable for Prosport fuel/oil pressure sensors as a replacement or for connecting a CanChecked. One end of the cable fits directly onto the Prosport oil pressure sensor. The other side is suitable for the following gauges from Prosport:
Racing premium series
Clear Lens Series (Oil Pressure Only)
HALO Premium Series
Clear Lens Premium Series
EVO premium series
JDM Premium Series
Supreme Premium Series
2:1 premium series
Not suitable for the following gauges:
BF Performance Series
EVO series
Clear Lens Series (Fuel Pressure)
HALO series
CANchecked Drehknopf / MFD15 Encoder
€41.78*
Der bereits aus der Generation 1 der MX-5 NC und ND CANchecked Anzeigen bekannte Drehknopf ist in der Generation 2 nur noch optimal erhältlich. Die Bedienung des CANchecked erfolgt bei der Generation 2 über die beiden Druckknöpfe direkt an der Anzeige selbst. Wer dennoch bei seinem Generation 2 CANchecked mit einem Drehknopf durch die Anzeigenseiten blättern will, hat hiermit eine Plug and Play Lösung. Mit dem 50cm langen Anschlusskabel lässt sich der Drehknopf flexibel an diversen Positionen montieren, welche eventuell besser zu erreichen sind als die Anzeige selbst.
Temperature sensor APD
€22.22*
The temperature sensor is suitable for water and oil. The sensor has a max. Deviation of 5%. Please pay attention to the imprint "APD" on the old giver. If this is not available, check the other donors or contact us.Compatible with the following Prosport series: BF Performance Series Racing Premium Series Clear lens series Clear Lens Premium Series Digital series HALO series
Resistance values as following:
°C
40
60
80
100
120
Ω
925
438
224
120
68
For an appointment for installation, please contact us at termin@sps-motorsport.com
Oil pressure / fuel pressure sensor for Prosport Premium series
€56.93*
The Prosport oil pressure or fuel pressure sensor has been specially designed for the Premium series and can be used for both. The new plug-in connection with safety clip prevents moisture or dirt from getting between the contacts. The thread size is 1/8 "27 (inches per inch) NPT.The sensor has a maximum deviation of about 1 %.It is ideally suited as a retrofit or replacement sensor.The measuring range is 0 to 10 BAR.With its special Tecknik With this very short thread, it is indispensable for difficult access and space problems! The thread is provided with a sealing tape at the factory and can therefore be used immediately.For an appointment for installation, please contact us at termin@sps-motorsport.com