Temperature sensor APD

D1 Spec adapter for installing a water temperature sensor in a 32mm cooling water hose. The adapter is simply inserted into the existing cooling water hose. Please insert the sensor with thread sealant in the adapter to avoid possible leakage. The scope of delivery includes the water temperature adapter in 32mm including 2 hose clamps for integration into the cooling system.

The oil filter adapter from D1 Spec offers you three ways to connect various display instruments for the interior of the vehicle, such as. Oil pressure instruments or oil temperature instruments. It is screwed directly between the oil filter and engine block. This allows the adapter to remain on the engine block when changing the oil, as only the overlying oil filter is replaced. Thus, the sensors and cables are protected directly in the engine compartment.Included in the package of the oil filter adapter are two blind plugs to close or expand two of the three openings when not in use. The threads are conical cut and therefore self-sealing! The sensors can not be screwed in until they stop !!! The sealing ring lies in a milled groove and therefore can not slip! The adapter is made of aluminum and can therefore be easily edited!On a colored anodization is omitted, otherwise it can lead to leaks !! With this product we offer you the simplest, safest and fastest solution for installing additional instruments in your vehicle. Thread of the holes for the sensors are 1/8" NPT.  When You install this oil filter adapter, the stock oil filter will not fit any longer. We have a shorter oil filter in our program which we recommend as an accessoire. Dimensions:   Diameter: 7.3cm x 7.3cm    Thickness: 2,7cm    Max. Sealing surface (outside): 7,3cm    minute Sealing surface (inside): 5,4cmdelivery    Oil filter adapter    2x dummy plugs    1x threaded bolt 3/4" 16 UNF    1x sealing ring

Drain plug for engine oil with pre-drilled sensor hole in 1/8 "NPT. Fits MX-5 NA/NB/NBFL/NC and ND. Usually the 115 PS NAs have the screws with a cone, all others have the screw variant without a cone. Before ordering, however, you should definitely check which variant is required in order to be able to rule out incorrect orders. 1/8 "NPT is a common dimension for temperature sensors, but the sensor should also be checked for the correct thread before ordering.

The oil filter adapter from D1 Spec offers you three ways to connect various display instruments for the interior of the vehicle, such as. Oil pressure instruments or oil temperature instruments. It is screwed directly between the oil filter and engine block. This allows the adapter to remain on the engine block when changing the oil, as only the overlying oil filter is replaced. Thus, the sensors and cables are protected directly in the engine compartment.Included in the package of the oil filter adapter are two blind plugs to close or expand two of the three openings when not in use. The threads are conical cut and therefore self-sealing! The sensors can not be screwed in until they stop !!! The sealing ring lies in a milled groove and therefore can not slip! The adapter is made of aluminum and can therefore be easily edited!On a colored anodization is omitted, otherwise it can lead to leaks !! With this product we offer you the simplest, safest and fastest solution for installing additional instruments in your vehicle. Thread of the holes for the sensors are 1/8" NPT.    Attention! This oil filter adapter is not compatible with our SPS oil cooling kit, because it has its own oil filter adapter. Dimensions:    Diameter: 7.3cm x 7.3cm    Thickness: 2,7cm    Max. Sealing surface (outside): 7,3cm    minute Sealing surface (inside): 5,4cmdelivery    Oil filter adapter    2x dummy plugs    1x threaded bolt M20x1,5    1x sealing ringFor an appointment for installation, please contact us at termin@sps-motorsport.com