CANchecked MFA GEN2 MX-5 NB/NBFL

With this multifunction display, you won’t miss any values – everything at a glance!

New Features

• WLAN Connect via smartphone allows configuration of display, widgets, sensors, and updates
• Improved graphics with better anti-aliasing
• Two side buttons directly on the display – no need to route cables or drill for a rotary knob
• Widgets adjustable with greater precision
• New warning popup functions
• 6 analog inputs instead of 4
• Optional logging via smartphone
• Freely configurable CAN bus protocol (TRI files as with MFD28/32)
• CAN bus switching / analogue forwarding for specific ECUs

Key Features from Generation 1

• 1.5" OLED display with standard 52 mm round instrument dimensions (like VDO gauges)
• Ultra-flat design – only 12.5 mm deep
• Perfect integration into the vehicle interior
• Up to eight different display windows freely configurable via WLAN Connect and smartphone
• ECU values can be displayed (connection via OBD2 port, cable included)
• Up to 64 sensors readable, queried like manufacturer diagnostic tools
• 6 analog inputs for 0–5V or NTC sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature with adapter, boost pressure, ethanol sensor with license upgrade, oil temperature, water temperature)
• Up to six sensors/values simultaneously in one display window
• Integrated LED shift light/warning lamp
• Customizable minimum, maximum, and popup functions for exceeding or undershooting warning values
• Built-in shift light
• Operates via OBD2, UDS, or standalone with analog sensors
• Online logging function
• Performance meter (measures e.g. 0–100 km/h and 100–200 km/h times – switchable to mph)

Data Displayed (depending on vehicle)

• Temperatures: coolant, intake air, exhaust gas, transmission
• Pressures: boost, ambient, oil
• Lambda/Mixture: target/actual lambda, short-term lambda trim, long-term lambda trim, MAF, engine load, torque
• Driver dynamics: brake pressure, vehicle speed, throttle angle/pedal position
• Other values: RPM, ignition timing, gear, battery voltage, cylinder-specific ignition retardation
• Analog inputs: additional sensors such as oil temperature, fuel pressure, oil pressure, exhaust gas temperature, ethanol sensor (Flex Fuel), and more

Included in Delivery

• CANchecked MFD15 GEN 2 OBD2 OLED Multifunction Display
• Vehicle-specific mounting bezel
• CANchecked rotary knob for convenient display operation
• Quickstart guide
• OBD2 cable
• Connector B (6-pin)
• Connector C (12-pin)
• 20 cm pre-crimped wiring harness for power supply, CAN bus, analog inputs, 5V, and sensor ground
• Pins for self-crimping
• Two 1K resistors (for pull-up with NTC sensors)

⚠️ Important Note: Reading sensor data via CAN bus is only possible with a freely programmable ECU that supports CAN bus functionality. With stock ECUs, CANchecked can only read and display analog sensors.