Garrett GT3071R turbocharger
Product number:
401532
Manufacturer:
Garrett
Product information "Garrett GT3071R turbocharger"
Performance: 280 - 480 hp
Displacement recommendation: 1.8 - 3.0L
Compressor: inlet 53.1mm / outlet 71.0mm / trim 56 / 0.50 A / R
Turbine: diameter 56.5mm / trim 90 / 0.86 A / R / internal wastegate
- double ball bearing (700382-20)
- Double ceramic ball bearing (836027-2)
- Oil and water cooled bearing system
- Internal wastegate without pressure box
- Inconel exhaust gas
Garrett is one of the few turbocharger manufacturers to undergo several qualification tests on the Turbos, meaning they always get a top product. It is u.a. Performed a 1000 hour durability test on an engine in a Garrett Engineering Laboratory. A pressure bearing test, the maximum tolerance of the bearing system is checked and material fatigue, a vibration test is performed etc.
The Garrett GT and GTX series are all double ball bearing, fine balanced and oil and water cooled. There are still the older generation T series these are usually sliding bearings. The GTX series differs from the normal GT, in that they have a special, larger, multi-vane compressor wheel resulting in more power and slightly better responsiveness. It is important for the ball-bearing turbocharger that they do not get too much oil pressure. Therefore, an oil restrictor with 0.9mm bore is used in the oil feed. A ball-bearing turbo speaks comparatively about 400-500 U / min earlier than a sliding bearing.
For an appointment for installation, please contact us at
termin@sps-motorsport.com
Displacement recommendation: 1.8 - 3.0L
Compressor: inlet 53.1mm / outlet 71.0mm / trim 56 / 0.50 A / R
Turbine: diameter 56.5mm / trim 90 / 0.86 A / R / internal wastegate
- double ball bearing (700382-20)
- Double ceramic ball bearing (836027-2)
- Oil and water cooled bearing system
- Internal wastegate without pressure box
- Inconel exhaust gas
Garrett is one of the few turbocharger manufacturers to undergo several qualification tests on the Turbos, meaning they always get a top product. It is u.a. Performed a 1000 hour durability test on an engine in a Garrett Engineering Laboratory. A pressure bearing test, the maximum tolerance of the bearing system is checked and material fatigue, a vibration test is performed etc.
The Garrett GT and GTX series are all double ball bearing, fine balanced and oil and water cooled. There are still the older generation T series these are usually sliding bearings. The GTX series differs from the normal GT, in that they have a special, larger, multi-vane compressor wheel resulting in more power and slightly better responsiveness. It is important for the ball-bearing turbocharger that they do not get too much oil pressure. Therefore, an oil restrictor with 0.9mm bore is used in the oil feed. A ball-bearing turbo speaks comparatively about 400-500 U / min earlier than a sliding bearing.
For an appointment for installation, please contact us at
termin@sps-motorsport.com
WITHOUT APPROVAL!