Performance Package 1.8 NA TC250

Mit TÜV Teilegutachten

€7,999.00*

Prices incl. VAT plus shipping costs

Delivery time 2-6 weeks

ECU

MS3 Mini NA (3 Plug)

MS3 Mini Plus NA (2 Plug)

Installation

Installation & TÜV

Without installation

Product number: LTP-NA-18-TU-1-3PIN

Product information "Performance Package 1.8 NA TC250"

This package marks your entry into the world of turbocharging at SPS Motorsport. With up to 250 HP, the Garrett GBC20-300 turbo system delivers serious performance while maintaining everyday drivability. Developed on the racetrack, refined for the street — this setup combines power, reliability, and TÜV compliance.

Two Options – Parts Package or Full Installation

You can choose between two configurations:

Parts Package (without installation): You receive all components for self-installation. ECU tuning, dyno protocol, and TÜV registration are not included.
Full Installation (with tuning & registration): All components are professionally installed at SPS Motorsport. The ECU is then individually calibrated on our in-house dyno and on the road — including dyno protocol. Finally, the entire conversion is inspected and officially registered at our facility. Registration is included in the price.

Included services with full installation:

Installation of the Garrett GBC20-300 turbo system
Installation of the high-flow sports catalytic converter
Installation and bleeding of the SPS aluminum radiator
Installation of the SPS oil cooler kit
Installation of the reinforced clutch
Installation of the standalone ECU incl. wideband lambda sensor
Installation of spark plugs
Oil change to Motalin 10W-60 HP Racing incl. new oil filter
ECU calibration on dyno and road
Dyno run incl. performance protocol
TÜV registration at SPS Motorsport

Power Increase – Up to 250 HP

This setup delivers a wide usable powerband, strong midrange torque, and sharp throttle response. Ideal for drivers seeking maximum performance with full street legality and TÜV approval.

Exhaust System Requirement

⚠️ Full power is only achieved when paired with an exhaust system featuring a minimum pipe diameter of 55 mm. We recommend our Group A or 3-inch exhaust system, which can be added as an accessory during checkout. Without it, the full performance potential will not be reached.

Registration & Certification

⚠️ This performance package can be combined with these exhaust systems:

Friedrich Motorsport Group A
IL Motorsport
BBK
Don Silencioso
Fox/SPS Group A
Fox/SPS JDM
SPS 3 inch exhaust system

For other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

Upgradeable & Modular

Our turbo packages are modular and fully upgradeable. If you decide to expand your setup later, we’ll provide the right support and advise you on meaningful upgrades.

Lifetime Support

Every performance package installed by us comes with lifetime support. Since we use these products ourselves — on the road and on track — we can help with nearly any issue quickly and practically. Got questions? Just ask!

Components Included

SPS Turbo Kit Garrett GBC20-300
MS3 Mini Plus 90–97 Plug-n-Play ECU (included in the turbo kit)
Bosch LSU 4.9 wideband lambda sensor
SPS aluminum radiator NA
SPS oil cooler kit NA/NB/NBFL BP
Xtreme Clutch Stage 1 kit 1.8 NA/NB/NBFL
NGK spark plug set BKR7EIX (included in the turbo kit)
Motalin 10W-60 HP Racing (5 L) incl. oil filter
Gaskets and high-quality installation hardware

Accessory Items

Front Air Duct MX-5 NA

Due to the high demand and our experience on the racetrack, we decided to build our own air ducts for the front of the MX-5. The air ducts are used to make the best possible use of the airflow and to flow precisely to the radiator and intercooler. For this purpose, we have scanned the front of the MX-5's 3D in order to produce a perfectly fitting air duct in OEM quality. Then the prototypes were 3D printed and adjusted again on the vehicle and possible errors corrected. So we can finally bring an absolutely flawless product onto the market. The air duct consists of 2 parts which are made of ABS plastic. In this way, the ducting can be easily adapted to modifications that do not come from our company. The lower part replaces the original front part of the air duct in the bumper and is attached to the original points. The upper part allows the air to flow upwards in order to use the full surface of the radiator. In our tests, we were able to reduce the water temperature by up to 25 ° C and the intake air temperature (for turbo and supercharger conversions) by up to 15 ° C. The product has been extensively tested in motorsport as well as on the road, which enabled us to improve its functionality even further. The ducting is suitable for all of our conversions sold by SPS Motorsport. Cutouts for piping for turbo conversions and supercharger conversions can be created through pre-shaped areas in order to be able to operate OEM cars as well as turbo and compressor conversions with one product and to keep all options for conversions open to you. So if a conversion is planned in the future, but you want to reduce your temperatures on the racetrack or while driving sportily on the street, this is your perfect product. For use with power steering there might be modifications necessary. The matching hood vents can be purchased under "add additional parts" so that the hot air can also be appropriately diverted from the engine compartment. CAUTION! DOES NOT FIT FOR VEHICLES WITH AIR CONDITIONING!

€199.00*

With EG-Approval

SPS Motorsport exhaust system 3" NA

3 " "Catback" exhaust system made of stainless steel by SPS Motorsport suitable for the MX-5 NA 1.6L and 1.8L. The exhaust system includes a universal flange with sliding pieces, pre- and rear silencer. Plug and play suitable for the downpipe of our turbo kits. When installing in combination with the original exhaust manifold and catalytic converter, adjustment work may be necessary. For an appointment for installation, please contact us at termin@sps-motorsport.com. with EC operating license.

€1,029.00*

Cooling package MX-5 NA 1.8

Cooling package suitable for Mazda MX-5 NA 1.8 liter engine from SPS Motorsport. The cooling package contains a SPS radiator and a SPS Motorsport oil cooler kit suitable for 1.8 liter engines. No matter whether you like to move your vehicle quickly on the road, like to drive track days or races, or just want to be prepared for the hot summer. With our cooling package you are on the safe side to prevent cooling problems with cooling water and engine oil! With our cooling packages, we rely on years of experience on the racetrack and countless customers who use this constellation on the road without any problems. No matter whether you drive a NA, NB, NC or ND, we have put together the right cooling packages for your vehicle, which we are always happy to recommend to customers. In our opinion, we use the best components from the scene for these kits.

€689.00*