Road Race Presilencer - Stainless Steel 86-92 RX-7

Racing Beat LLC

Single Registration at SPS

€740.00*

Prices incl. VAT plus shipping costs

Delivery time 2-6 weeks

Product number: 16448

Product information "Road Race Presilencer - Stainless Steel 86-92 RX-7"

Racing Beat's Road Race Stainless Steel Presilencer for the 1986-92 RX-7 is intended to bolt-up to the dual outlet of the Road Race RX-7 Header. This fully stainless steel presilencer has been especially designed to function with the Road Race header to offer a "true" dual primary exhaust system for the 1986-92 RX-7. The outlet end of this RX-7 presilencer section is intended to bolt-up to the inlet of the Road Race Y-pipe section.

This Presilencer unit is equipped with dual stainless steel 2" OD tubes, presilencer canister, mounting hangers, and attachment flanges. This unit incorporates the factory hanger positions and comes complete with outlet gasket and (6) mounting bolts/nuts. This unit weighs 24 lbs and is approximately 34" in length.

Racing Beat Note: If you have located this part from the parts listing on the drop-down menu, we suggest you review the information on the introduction page for the RX-7 Road Race Exhaust System. This page provides details on the components for your exact application and serves as a useful "starting point" when building your exhaust system. For an overview of the Road Race Exhaust System, click here.

Replacement Rubber Exhaust Hangers
We recommend the replacement of the original RX-7 rubber exhaust hangers during the installation of any new exhaust component. It is our experience that over time the original rubber hangers can deteriorate, crack, and fail; which can result in the incorrect alignment of the exhaust system.

We offer replacement exhaust hangers for all models of 1986-92 RX-7's. Review the Exhaust Hanger Chart for details on the exact components that are required for your exhaust system.

Accessory Items

Replacement Hanger A Muffler Outlet and Y-Pipe

1986-92 RX-7 Exhaust System Replacement Rubber Hangers (Sold and priced as individual units.) - Tired, old rubber hangers may the source of potential trouble for the exhaust system on your RX-7! We have found that with age, the rubber hangers that support the exhaust components can deteriorate, crack and fail. This results in "sagging" exhaust components, and possible misalignment of the muffler tips in the bumper opening. We offer replacement hangers for ALL models of 1986-92 RX-7's. Replacement Hanger A - Application Guide This OEM style hanger is a direct replacement for the hanger found on the rear muffler hangers and the front of the y-pipe section. 1. Two (2) rubber hangers are required for the rear of each muffler. 2. Two (2) rubber hangers are required for the front of the Y-pipe section.

€69.98*

Replacement Hanger B Mid Y-Pipe

1986-92 RX-7 Exhaust System Replacement Rubber Hangers (Sold and priced as individual units.) - Tired, old rubber hangers may the source of potential trouble for the exhaust system on your RX-7! We have found that with age, the rubber hangers that support the exhaust components can deteriorate, crack and fail. This results in "sagging" exhaust components, and possible misalignment of the muffler tips in the bumper opening. We offer replacement hangers for ALL models of 1986-92 RX-7's. Replacement Hanger B - Application Guide This OEM style hanger is a direct replacement for the hanger found at the mid-section of the Y-pipe. 1. Two (2) rubber hangers are required for the mid-section of the Y-pipe.

€99.98*

Replacement Hanger C Muffler Inlet

1986-92 RX-7 Exhaust System Replacement Rubber Hangers (Sold and priced as individual units.) - Tired, old rubber hangers may the source of potential trouble for the exhaust system on your RX-7! We have found that with age, the rubber hangers that support the exhaust components can deteriorate, crack and fail. This results in "sagging" exhaust components, and possible misalignment of the muffler tips in the bumper opening. We offer replacement hangers for ALL models of 1986-92 RX-7's. Replacement Hanger C - Application Guide This OEM style hanger is a direct replacement for the hanger found at the inlet of the muffler. 1. One (1) rubber hanger per muffler is required for the inlet hanger.

€99.98*

Replacement Hanger D Presilencer/Cat Converter

1986-92 RX-7 Exhaust System Replacement Rubber Hangers (Sold and priced as individual units.) - Tired, old rubber hangers may be the source of potential trouble for the exhaust system on your RX-7! We have found that with age the rubber hangers that support the exhaust components can deteriorate, crack and fail. This results in "sagging" exhaust components and possible misalignment of the muffler tips in the bumper opening. For 1986-92 RX-7 owners we offer replacement hangers for ALL models. Replacement Hanger D - Application Guide 1986-92 RX-7 Catalytic Converter/Presilencer (Except 1991-92 Auto transmission models*)This OEM style hanger is a direct replacement for the hanger located on the cat converter/presilencer. 1. One (1) rubber hanger per muffler is required for the presilencer. *Note: 1991-92 automatic transmission cars require a different hanger that can be special ordered through Racing Beat, or obtained through your local Mazda dealer.

€94.99*

Complete Exhaust Hanger Kit 86-92 ALL (MT)

Tire, old rubber hangers may the source of potential trouble for the exhaust system on your RX-7! We have found that with age, the rubber hangers that support the exhaust components can deteriorate, crack and fail. This results in "sagging" exhaust components, and possible misalignment of the muffler tips in the bumper opening. This complete kit includes ALL of the rubber hangers that are required to support the exhaust system on the 1986-92 RX-7 (except 1991-92 automatic transmission models). Note: 1991-92 automatic transmission cars require a different cat converter/presilencer hanger that can be special ordered, or obtained through your local Mazda dealer (N304-40-161A.). The complete kit contains the following hangers: A. Y-pipe inlet and muffler outlet hanger - PN 16329 (6 each)B. Y-pipe mid section - PN 16330 (2 each)C. Muffler inlet - PN 16331 (2 each) D. Presilencer hanger - Presilencer PN 16332 (1 each) Individual hangers are available separately, review the Exhaust Hanger Chart for details on the exact components that are required for your exhaust system.

€399.99*

Road Race Y-Pipe - Stainless Steel

Racing Beat's Road Race Stainless Steel Y-Pipe is intended to bolt-up to the dual outlet of the Road Race Presilencer unit. This Y-pipe section incorporates the factory hanger positions and comes complete with outlet gasket and (4) mounting bolts/nuts. This unit weighs 13 lbs and is approximately 29" in length. Note: This Road Race Y-Pipe is intended to bolt-up to the Road Race Extension Tubes (PN 16412), OR the Racing Beat Road Race Mufflers (PN 16438 & 16439).

€475.00*