Go to homepage Go to homepage
0

SPS Motorsport Flat Underbody


Single Registration at SPS
Skip image gallery

€1,599.00*

Prices incl. VAT plus shipping costs

Delivery time 2-6 weeks

Rails
Vehicle
Product number: U-COVER-NA
Manufacturer: SPS Motorsport GmbH

Product information "SPS Motorsport Flat Underbody"

Reach new performance heights and improve the aerodynamics of your Mazda MX-5 NA, NB, or NBFL with our specially designed flat underbody kit. This package includes everything you need to provide your vehicle with extra stability and better ground grip.

Product Details:

  • Flat Underbody: Designed to minimize drag and increase driving stability. The flat design ensures better aerodynamics and reduces lift.

  • Skidnation Butterfly Combo: A specially adapted combination for the underbody, providing additional structural support. This bracing minimizes body roll and improves handling.

  • Complete Mounting Hardware: Everything needed for installation is included in the package. This includes all necessary screws, clamps, and instructions to make the installation as straightforward as possible

 

Selection:

  • Frame rails with butterfly: A complete kit with all the parts needed for assembly.
  • Butterfly: If you already have frame rails, we will supply the butterfly separately.
  • Without frame rails with butterfly: For everyone who has already installed frame rails with butterfly struts. (Holes must be drilled to install the underbody)

 

With this underbody kit, you not only optimize the aerodynamics of your MX-5 but also enhance its overall performance, especially in demanding driving situations and on the racetrack.

Single registration in our house, further approvals in preparation.

Skip product gallery

Accessory Items

Tip
Mit TÜV Teilegutachten
SPS Motorsport Bodykit MX-5 NB / NBFL
SPS Motorsport Bodykit MX-5 NB / NBFL
Material: Fiberglass
SPS Motorsport Bodykit suitable for Mazda MX-5 NB / NBFL made of GRP. The body kit consists of the front fender flares and rear overfenders (each for left and right) as well as the two side skirts. The complete body kit is made of fiberglass and is therefore very light. The kit creates a widening of the vehicle by around 25mm per side. The kit is designed for the following wheel-tire combinations: 15x10 offset 25 with 275/35R15 tires 15x9 offset 0 with 245/40R15 tires     What do I get with this body kit?   Fender flares made of GRP for the front fenders (left and right) Overfender made of GRP for the side parts of the rear (left and right) Side skirts made of GRP to attach over the original side skirts     Will be delivered with TÜV parts certificate! 

€1,844.99*
Single Registration at SPS
Fastback Hardtop MX-5 NA
Fastback Hardtop MX-5 NA
Material: Fiberglass
After a long wait, we can finally offer our own Fastback hardtops! This hardtop kit includes everything you need to mount the Fastback on your MX-5 NA. The hardtop is firmly screwed onto the car. The trunk cannot be opened as OEM and has to be lifted off. The hardtop is therefore not recommended in combination with a vehicle that is used every day. It is intended more as a component for racing vehicles in order to positively influence the aerodynamics of the MX-5.With this kit you get the following components: Fastback hardtop made of GRP or Forged Carbon suitable for MX-5 NA GRP or Forged CArbon trunk, which was specially adapted for the Fastback hardtop Hardtop brackets for attachment to the original attachment points at the front as well as to the B-pillar (incl. Mounting material) 3mm Makrolon side windows on the left and right for the small triangular windows in the hardtop 5mm Makrolon rear window for the hardtop Screw material for all windows of the hardtop We recommend installing the windows with windscreen adhesive in addition to the screw connection. As mentioned above, the hardtop is not suitable for everyday use but is only used for motor sports vehicles. The GRP version has TÜV component approval, whereas the forged carbon version does not.

€2,790.00*
Tip
Mit TÜV Teilegutachten
Fastback Hardtop MX-5 NB/NBFL
Fastback Hardtop MX-5 NB/NBFL
After a long wait, we can finally offer our own Fastback hardtops! This hardtop kit includes everything you need to mount the Fastback on your MX-5 NB or NBFL. The hardtop is firmly screwed onto the car. The trunk cannot be opened as OEM and has to be lifted off. The hardtop is therefore not recommended in combination with a vehicle that is used every day. It is intended more as a component for racing vehicles in order to positively influence the aerodynamics of the MX-5.With this kit you get the following components: Fastback hardtop made of GRP suitable for MX-5 NB/NBFL GRP trunk, which was specially adapted for the Fastback hardtop Hardtop brackets for attachment to the original attachment points at the front as well as to the B-pillar (incl. Mounting material) 3mm Makrolon side windows on the left and right for the small triangular windows in the hardtop 5mm Makrolon rear window for the hardtop Screw material for all windows of the hardtop We recommend installing the windows with windscreen adhesive in addition to the screw connection. As mentioned above, the hardtop is not suitable for everyday use but is only used for motor sports vehicles.

€2,399.00*
Single Registration at SPS
SPS Motorsport Bodykit MX-5 NA
SPS Motorsport Bodykit MX-5 NA
Bodykit: Full Overfender | Material: Fiberglass
SPS Motorsport body kit suitable for Mazda MX-5 NA made of GRP. The body kit consists of the front fenders, side skirts, front bumper, front splitter and rear overfenders (each for left and right). The complete body kit is made of GRP and is therefore very light. The kit widens the vehicle by approximately 20mm per side. The kit is designed for the following wheel-tire combination: 15x8 offset 0 with 205/50R15 tires   What do I get with this body kit? Front axle fender made of GRP (left and right) Overfender made of GRP for the rear quarter panels (left and right) Side skirts made of GRP to be attached over the original side skirts Front bumper made of GRP Front splitter made of GRP For a stylish finishing touch, we recommend the Fastback hardtop.

€2,190.00*
Tip
Mit TÜV Teilegutachten
SPS Motorsport Carbon Fiber Adjustable Rear Wing
SPS Motorsport Carbon Fiber Adjustable Rear Wing
Our SPS Motorsport Carbon Fiber Rear Wing for the Mazda MX-5 is an adjustable rear spoiler specifically designed to improve the aerodynamics and downforce of the MX-5. With a width of 120 cm and a height of 20 cm, this spoiler offers the perfect balance of performance and style for the compact roadster. Features: Material: Made from carbon fiber reinforced composites (CFRP), known for their lightness and durability. Design: The spoiler was modeled using Computational Fluid Dynamics (CFD) to ensure optimal aerodynamic properties. Adjustability: The angle of attack of the spoiler can be adjusted in 3 steps to increase or decrease downforce as required. Variants: Available in 2 variants. With feet to be mounted directly on the tailgate and with side brackets for attachment to a fastback or a GRP tailgate. Assembly: The feet of the spoiler are made of 6061 aluminum and powder-coated black to ensure a robust and durable attachment. TÜV: The rear wing has been tested by TÜV in extensive tests. The TÜV-certificate is included and part of the delivery. This spoiler is ideal for drivers who are looking for improved vehicle stability and control on both the road and the race track. By using high-quality materials and advanced manufacturing techniques, our adjustable rear wing not only offers impressive performance, but also an attractive appearance.

From €1,444.15*
Details
%
Tip
Mit TÜV Teilegutachten
SPS Motorsport Carbon Fiber Adjustable Rear Wing Fastback
SPS Motorsport Carbon Fiber Adjustable Rear Wing Fastback
Our SPS Motorsport Carbon Fiber Rear Wing for the Mazda MX-5 is an adjustable rear spoiler specifically designed to improve the aerodynamics and downforce of the MX-5. With a width of 120 cm and a height of 20 cm, this spoiler offers the perfect balance of performance and style for the compact roadster. Features: Material: Made from carbon fiber reinforced composites (CFRP), known for their lightness and durability. Design: The spoiler was modeled using Computational Fluid Dynamics (CFD) to ensure optimal aerodynamic properties. Adjustability: The angle of attack of the spoiler can be adjusted in 3 steps to increase or decrease downforce as required. Variants: Available in 2 variants. With feet to be mounted directly on the tailgate and with side brackets for attachment to a fastback or a GRP tailgate. Assembly: The feet of the spoiler are made of 6061 aluminum and powder-coated black to ensure a robust and durable attachment. TÜV: The rear wing has been tested by TÜV in extensive tests. The TÜV-certificate is included and part of the delivery. This spoiler is ideal for drivers who are looking for improved vehicle stability and control on both the road and the race track. By using high-quality materials and advanced manufacturing techniques, our adjustable rear wing not only offers impressive performance, but also an attractive appearance.

From €1,444.15* €1,699.00* (15% saved)
Details

Subscribe to our regular newsletter now to stay tuned on the latest products and special offers.

Privacy*
This website uses cookies to ensure the best experience possible. More information...