SPS Superchargerkit NA 1.6

Product information "SPS Superchargerkit NA 1.6"

All products, as well as the Superchargerkit offered here, are developed by SPS Motorsport on the racetrack, adapted to the road and constantly improved. We place utmost importance on the quality of the installed parts and their function.

Development
All Supercharger kits are configured and packed in our house. We use all products in our vehicles.
It was important to us in the development of the Supercharger kits that on the one hand they meet the requirements of our customers, the power development and the optics in the engine compartment are as close to the production as possible.
We use the best components of the scene in our eyes.
The kit comes complete including matching basemap. The kit is not suitable for vehicles with air conditioning. For in house builds we offer special conversions for vehicles with air conditioning, where the piping is built directly on the vehicle.

The versions without power steering can be used equally for vehicles that were not supplied with power steering as standard, as well as for vehicles in which the power steering was subsequently removed.

Upgrade
All of our Supercharger kits are designed to be easily upgradeable. Of course, we provide the necessary support with a corresponding upgrade and will gladly advise you.

TÜV registration

⚠️ This set can only be combined with these exhaust systems together with our race header with catalytic converter:

Friedrich Motorsport Group A
Fox/SPS Group A
BBK

For other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

Support
All Supercharger kits sold by us receive lifelong support. Since we drive and use the products ourselves, as well as on the racetrack, we can help with almost any problem. You have questions, ask us!

This kit can be mounted on both the 115hp 1.6 NA and the 90hp 1.6 NA.

Performance

C30-74 230hp on stock engine
C30-84 240hp on stock engine
C30-94 270hp (only with forged engine)

Components
Original Rotrex Supercharger incl. Matching connection accessories
KMX Hardpipe boost pressure piping
efficient intercooler
Open air filter
SPS Motorsport 700CC Injectors (calibrated and tested)
Engine control unit with matching basemap
mounting material
Bosch wideband lambda sensor LSU 4.9

For safe use we recommend the following components:

- Cooling Kit

- Clutch (shown above)

- This wiring harness is precisely soldered and offers you a plug-and-play solution for those who don’t want to build their own harness for the ECU.

Accessory Items

Xtreme Clutch clutch kit 1,6 NA/NB/NBFL

Clutch kit suitable for 1.6 NA / NB / NBFL with performance increase. The clutches are designed in 3 stages to make it easier for you to choose the right clutch for your vehicle. The different stages are intended for the following uses: Stage 1: Organic clutch disc with reinforced pressure plate for use in turbo conversions on stock engines (up to 250hp) and all types of natural aspired engines, not suitable for race use on slicks Stage 2: Multi segment ceramic clutch disc with reinforced pressure plate for use in turbo conversions with forged engines up to 1.3 bar boost pressure (350 hp). Clutch engagement is more agressive and ruff. Stage 3: ceramic clutch disc in racing configuration with extra reinforced pressure plate for use in turbo conversions with forged engines above 1.3 bar boost pressure (up to 390 hp). Clutch engagement is more agressive and ruff. The scope of delivery includes: clutch disc pressure plate release bearing pilot bearing Centering mandrel for centering the clutch

From €319.99*

Details

Cooling package MX-5 NA 1.6

Cooling package suitable for Mazda MX-5 NA 1.6 liter engine from SPS Motorsport. The cooling package contains a SPS radiator and a SPS Motorsport oil cooler kit suitable for 1.6 liter engines. No matter whether you like to move your vehicle quickly on the road, like to drive track days or races, or just want to be prepared for the hot summer. With our cooling package you are on the safe side to prevent cooling problems with cooling water and engine oil! With our cooling packages, we rely on years of experience on the racetrack and countless customers who use this constellation on the road without any problems. No matter whether you drive a NA, NB, NC or ND, we have put together the right cooling packages for your vehicle, which we are always happy to recommend to customers. In our opinion, we use the best components from the scene for these kits.

€749.00*

Mit TÜV Teilegutachten

Exhaust manifold incl. catalytic converter MX-5 1.6L NA

We finally have our own manifolds! You get a complete stainless steel manifold kit including 400 cells catalytic converter suitable for the 1.6L MX-5 NA. The kit can be registered with any TÜV inspector with our appropriate parts certificate. So you get a completely legal solution to give your exhaust system the finishing touch! The parts certificate also covers our exhaust manifold with catalytic converter in combination with the SPS Motorsport Group A exhaust system. A separate test including noise measurement during TÜV registration is required for use with other exhaust systems. The manifold & catalytic converter combination is directly suitable for your OEM or Friedrich Motorsport cat-back exhaust system. With this kit you get the following components: Stainless steel exhaust Manifold suitable for MX-5 NA 1.6L Specially adapted catalytic converter pipe with 400 cells catalytic converter Heat protection tape for winding the manifold (please so that the welded label is still legible) 10x metal cable ties to attach the heat protection tape to the manifold 1x exhaust manifold gasket 1x gasket suitable for the lower exhaust flange in the direction of the exhaust system 9x copper nuts M10x1.25 (for mounting the manifold on the engine) Mounting material for connecting the lower exhaust flange towards the exhaust system TÜV parts certificate Depending on the OEM positioning of the window washer tank, it may happen that the original window washer tank can no longer be used. For this we recommend the window washer tank of the Suzuki Cappuchino, which you can find under "add additional parts". TÜV registration⚠️ This set can be combined with these exhaust systems:Friedrich Motorsport Group AFox/SPS Group AFox/SPS JDMIL MotorsportBBKDon SilenciosoFor other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

€1,599.99*

No Registration Required

SPS Radiator Hose Complete Set MX-5 1.6L NA

A complete radiator hose kit for the Mazda MX-5 B6ZE NA (1.6 liter, built in 1990-1994) includes all the necessary hoses needed for the vehicle's cooling system. These hoses are crucial for the efficient cooling of the engine and help prevent overheating. Complete radiator hose kit for Mazda MX-5 B6ZE NAProduct description: Compatibility: Mazda MX-5 NA (1.6 liter, B6ZE engine, built in 1990-1994) Material: High quality EPDM (ethylene propylene diene rubber) for increased heat resistance and durability Color: Black Installation position: Includes hoses for upper and lower cooling circuits Scope of delivery:- Upper radiator hoses- Lower radiator hoses- Check valve (for the brake booster) Features: Heat resistance: The hoses are designed to withstand high temperatures and withstand extreme conditions in the engine compartment. Pressure Resistance: Designed to handle cooling system pressure and prevent leaks. Durability: Longer lifespan compared to standard rubber hoses, reducing the need for frequent replacements. Fit: Precision engineered to ensure a perfect fit and easy installation.

€124.99*

No Registration Required

SPS Radiator Hose - Radiator to Engine Set 1,6L MX-5 NA

Radiator Hose Kit for Mazda MX-5 B6ZE NA This high quality radiator hose kit is specifically designed for the Mazda MX-5 B6ZE NA (1.6L). It includes all three main hoses that connect the radiator to the engine. These hoses are critical to the efficient cooling of your engine and help extend the life of your vehicle. Features: Precision fit: The hoses are precisely designed to fit the connections on the Mazda MX-5 B6ZE NA, ensuring a perfect fit. Material: Made from durable, heat-resistant silicone that offers greater pressure and temperature resistance than conventional rubber hoses. Complete kit: Includes all three necessary hoses for replacing the radiator-to-engine connections. Easy installation: The hoses are designed to be easily installed without the need for special tools. Durability: Silicone hoses offer a longer life and better performance in extreme conditions.

€46.90* €66.99* (29.99% saved)