Top seller
No results were found for the filter!
Running Gear Kit Energy Suspension MX-5... Suspension Bushing Set front and rear axle for Mazda MX-5 NA/NB/NBFL, for track purpose, Shore durometer 70A Hyper-Flex System; Red; Incl. Front and Rear Control Arm Bushing; Performance Polyurethane; Energy's Hyper-Flex(TM) is superior...
€454.46 *
Running Gear Kit Energy Suspension MX-5... Suspension Bushing Set for all wishbones of front and rear axle for Mazda MX-5 NA/NB/NBFL, for street purpose, Shore durometer 70A with graphite content for lubrication property Hyper-Flex System; Black; Incl. Front & rear Control Arm...
€454.46 *
Adapter wiring loom for VVT swap This complete wiring kit converts your MX-5's wiring harness into a plug-and-play 1.8 VVT wiring harness. CAUTION! Can only be used with a standalone ECU! This kit does not include a solution for the ignition wiring harness. Here we...
From €48.47 *
10% Saved
MS Labs Drive by Wire Modul MS Labs Drive by Wire module for using an electronically controlled throttle body in combination with an MS3. Using an electronically controlled throttle body offers many advantages over a conventional throttlebody. For example, the idle...
€417.69 * €464.10 *
Turbosmart Blowoff valve 25mm Kompact Plumb Back Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV....
€133.36 *
Stud M10 for turbo High temperature M10x1.5 or M10x1.25 stud, ideally suited for fastening the turbocharger to the manifold and the turbo elbow to the turbocharger. The studs are an integral part of our turbo kits and are used successfully on the road as...
€9.10 *
Alternator Hella MX-5 NA 1.6L Alternator from Hella suitable for 1.6L MX-5 NA for use with V-belts (not V-ribbed belts). Charging [A]: 60 Voltage [V]: 14 Number of ribs: 1 Pulley diameter [mm]: 74 DANGER! Not suitable for MX-5 NA 1.8L and MX-5 NB/NBFL!
€179.61 *
Hardrace upper camber arm set rear axle MX-5... Upper camber arms suitable for the rear axle on the MX-5 NA/NB/NBFL. The wishbones have a camber adjustment by moving the outer suspension point of the wishbone to the steering knuckle in and out. The scope of delivery includes 2...
€423.50 *
29.54% Saved
StopTech Rotor Big Brake Kit NC/ND/RX-8... One StopTech Race Rotor with street hardware fitting on the StopTech Big Brake Kit for the MX-5 NC, ND and RX-8 (309x32mm). StopTech Pillar Vane Brake Rotors are engineered to provide superior strength while reducing rotor weight and...
€155.12 * €220.14 *
Hardrace strut bar rear axle MX-5 NA/NB/NBFL Hardrace strut bar suitable for MX-5 NA/NB/NBFL on the rear axle. The strut brace is screwed directly onto the rear suspension mounts and thus effectively helps to reduce body twist. This results in improved steering behavior because the...
€149.00 *
Hardrace strut bar front axle MX-5 NA/NB/NBFL Hardrace strut bar suitable for MX-5 NA/NB/NBFL on the front axle. The strut brace is screwed directly onto the front suspension mounts and thus effectively helps to reduce body twist. This results in improved steering behavior because...
€149.00 *
Hardrace sway bar rear axle MX-5 NB/NBFL Hardrace sway bar for the rear axle of the MX-5 NB/NBFL. The hollow structure makes the sway bar lighter than competing products made from solid material. The sway bar helps enormously when the vehicle sways and leans when cornering and...
€203.80 *