Skip to main content Skip to search Skip to main navigation

Performance Parts Package 1.6 NA SC220

Product information "Performance Parts Package 1.6 NA SC220"

This package is your entry into the world of supercharged MX-5 performance at SPS Motorsport. With up to 220 HP, the C30-74 supercharger kit delivers linear power delivery, sharp throttle response, and full street legality. Developed on the racetrack, refined for the road — uncompromising in quality, drivability, and TÜV compliance.

Two Options – Parts Package or Full Installation

You can choose between two configurations:

  • Parts Package (without installation): You receive all components for self-installation. ECU tuning, dyno protocol, and TÜV registration are not included.
  • Full Installation (with tuning & registration): All components are professionally installed at SPS Motorsport. The ECU is then individually calibrated on our in-house dyno and on the road — including dyno protocol. Finally, the entire conversion is inspected and officially registered at our facility. Registration is included in the price.

Included services with full installation:

  • Installation of the C30-74 supercharger kit with 80 mm pulley
  • Installation of the SPS header incl. high-flow catalytic converter
  • Installation and bleeding of the SPS aluminum radiator
  • Installation of the SPS oil cooler kit
  • Installation of the reinforced clutch
  • Installation of the standalone ECU incl. wideband lambda sensor
  • Installation of spark plugs
  • Oil change to Motalin 10W-60 HP Racing incl. new oil filter
  • ECU calibration on dyno and road
  • Dyno run incl. performance protocol
  • TÜV registration at SPS Motorsport

Power Increase – Up to 220 HP

This setup delivers smooth, predictable power with strong midrange torque and a linear boost curve. Ideal for drivers who want everyday drivability with serious performance and TÜV approval.

Exhaust System Requirement

⚠️ Full power is only achieved when paired with an exhaust system featuring a minimum pipe diameter of 55 mm. We recommend our Group A exhaust system, which can be added as an accessory during checkout. Without it, the full performance potential will not be reached.

Registration & Certification

⚠️ This performance package can be combined with these exhaust systems:

  • Friedrich Motorsport Group A
  • BBK
  • Fox/SPS Group A

For other exhaust systems please contact us in advance via email, so we can check first whether a TÜV registration is possible.

Upgradeable & Modular

Our supercharger packages are modular and fully upgradeable. If you decide to expand your setup later, we’ll provide the right support and advise you on meaningful upgrades.

Lifetime Support

Every performance package installed by us comes with lifetime support. Since we use these products ourselves — on the road and on track — we can help with nearly any issue quickly and practically. Got questions? Just ask!

Components Included

  • SPS Supercharger Kit C30-74 for NA 1.6 with 80 mm pulley
  • MS3 Mini 89–95 Plug-n-Play ECU (included in the supercharger kit)
  • Bosch LSU 4.9 wideband lambda sensor
  • SPS header incl. high-flow catalytic converter
  • SPS aluminum radiator NA
  • SPS oil cooler kit NA/NB/NBFL B6
  • Xtreme Clutch Stage 1 kit 1.6 NA
  • NGK spark plug set BKR7EIX (included in the supercharger kit)
  • Motalin 10W-60 HP Racing (5 L) incl. oil filter
  • Gaskets and high-quality installation hardware
Skip product gallery

Accessory Items

With EG-Approval
SPS Motorsport group A exhaust system
SPS logo: without SPS laserlogo | Tip: Tailpipe 76mm, sharp-edged, angled
Our SPS Motorsport sports exhaust system replaces the original front and rear silencers. The system is available with a 76mm tailpipe. The systems are based on the absorption principle, meaning that perforated tubes run through the silencers. This results in lower exhaust back pressure and thus an increase in power and torque. Compared to the standard system, it also produces a deeper and more powerful exhaust sound. This complete stainless steel exhaust is suitable for model years 1989-1998 with engine power outputs of 66, 85, or 96 kW. It is delivered with an EC type-approval certificate. To schedule an installation appointment, please contact us at info@sps-motorsport.com

€968.99*
With EG-Approval
SPS Motorsport JDM exhaust system MX-5 NA
SPS logo: without SPS laserlogo | Tip: Tailpipe JDM 90mm
Finally, it's here! Our very own JDM style exhaust system for the MX-5 NB and NBFL!The system is made in 63,5mm pipe diameter and comes with a 90mm tailpipe on the typical JDM-style rear silencer.The systems are based on the absorption principle, meaning that perforated pipes run through the silencers. This results in lower exhaust back pressure, which in turn leads to an increase in power and torque. Compared to the standard system, it also produces a deeper and more powerful sound. This complete stainless steel exhaust is suitable for model years 1989-1998 with engine power outputs of 66, 85, or 96 kW.It is delivered with an EC type-approval certificate.To schedule an installation appointment, please contact us at info@sps-motorsport.com

€1,179.99*