Top seller
Single registration in our house
No results were found for the filter!
MAP1.15 Sensor and plug L The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar...
€144.99 *
Link IGN1A - Smart Coil incl. Connector Kit High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge Built-in ignitor with external heat sink Requires HEI-type plug wire ends/...
€104.99 *
TCC04 4 Channel EGT to CAN Module Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device....
€264.99 *
Link Razor Triple Bundle Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup. The Razor PDM...
€2,799.00 *
Link RACEPAD – CAN Lenkradtastenfeld RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8 easy-to-reach buttons, RacePad is the ideal addition to any race car, enabling both...
€1,074.00 *
Link Combined Pressure and Temperature Sensor... Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Diesel, gasoline, E85, engine oil, transmission oil Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for...
€149.99 *
Link Pin Connector Kit E (TKE) Plug and Pin Kit only, E Plug. Includes: 1 x 26 position Superseal Connector Housing "E Plug" 26 x Superseal Terminals Gold Contact Finish “Pins” Suitable for: G5 Voodoo Pro (26 pin E Connector)
€49.99 *
Link 4 Bar MAP Sensor (MAP4) The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly...
€154.99 *
Street Coilover Kit - #D-MA-10-STREET - Mazda... The D2 Street (RS) Series suspension kit is the most popular coilover. Featuring a 36-way damping and rebound adjustable monotube design, Street coilovers are perfect for the modified street car that also sees occasional track days. This...
€1,279.00 *
WITH TÜV PARTS CERTIFICATE!
Wheel Spacers System 3 RT (RaceTech) MX-5... Suitable wheel spacers for your MX-5 NA/NB/NBFL/ND, available in Uncoated, black, or silver anodized. Delivered in pairs (for one axle). The dimensions for the bolt pattern are 4x100, with a hub centering diameter of 54.1 mm, Thread size...
From €214.99 *
WITH TÜV PARTS CERTIFICATE!
Wheel Spacers System 2 MX-5 NA/NB/NBFL/ND Suitable wheel spacers for your MX-5 NA/NB/NBFL/ND, available in Uncoated, black, or silver anodized. Delivered in pairs (for one axle). The dimensions for the bolt pattern are 4x100, with a hub centering diameter of 54.1 mm. The System...
From €89.99 *
WITH TÜV PARTS CERTIFICATE!
Wheel Spacers System 5 MX-5 NA/NB/NBFL/ND Suitable wheel spacers for your MX-5 NA/NB/NBFL/ND, available in Uncoated, black, or silver anodized. Delivered in pairs (for one axle). The dimensions for the bolt pattern are 4x100, with a hub centering diameter of 54.1 mm. The System...
From €44.99 *