Top seller
No results were found for the filter!
Davies Craig electric water pump 115L/Min., 10A Craig Davies Electric Water Pump 115 L/min recommended for cars Technical Specifications Operating Voltage: 3-15 V Amps: 10 A Pump Capacity: 115 L/min (at 13 V) Operating Range: -40°C to +130°C Weight: Approx. 980 grams Hose Connection...
€184.99 *
Craig Davies electric water pump 150L/Min., 10A Craig Davies Electric Water Pump Kit 150 L/min, recommended for cars >280hp | This electric water pump was designed with performance and reliability in mind to replace the conventional belt-driven water pump. It ensures full power across...
€220.00 *
Craig Davies electric water pump 115L/Min., 10A... Craig Davies Electric Water Pump 115 L/min, recommended for cars Technical Specifications Operating voltage: 3-15 V Amps: 10 A Pump capacity: 115 L/min (at 13 V) Operating range: -40°C to +130°C Weight: approx. 1200 grams Connection...
€199.99 *
Davies Craig Digital EWP/FAN Controller Electronic system for conveniently monitoring and adjusting engine temperature from the interior. The device is compatible with the EWP (Exhaust Coolant Temperature Controller), and electric fans can also be controlled. The control unit...
€190.00 *
Davies Craig water pump bracket Davies Craig bracket and mounting plate with buffer for the EWP115, EWP130, and EWP150 water pumps. The EWP bracket and mounting plate offers a lightweight and space-saving mounting solution.
€49.99 *
Link connector and pin kit A Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only. Suitable for: All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme) Link G4+ Atom (NB: Does NOT suit the earlier G4 Atom...
€49.98 *
Link XS Extension Cable (XSL) Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is...
€49.98 *
Link EGT Sensor Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test &...
€154.99 *
MAP1.15 Sensor and plug L The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar...
€144.99 *
Link IGN1A - Smart Coil incl. Connector Kit High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge Built-in ignitor with external heat sink Requires HEI-type plug wire ends/...
€104.99 *
TCC04 4 Channel EGT to CAN Module Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device....
€264.99 *
Link Razor Triple Bundle Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup. The Razor PDM...
€2,799.00 *