info@sps-motorsport.com
Versand innerhalb von 24h*
info@sps-motorsport.com
Hotline 06432 6409960
 

Performance Parts MX-5 NC (2006-2015)

The MX-5 NC is the third generation of the popular Mazda roadster range. For this generation, too, we offer all the components and kits that you need to convert and modify your MX-5 NC in our performance parts shop. Turbo kits to increase performance, short shifters, exhaust systems and many other components are waiting in the categories to be discovered by you!

The MX-5 NC is the third generation of the popular Mazda roadster range. For this generation, too, we offer all the components and kits that you need to convert and modify your MX-5 NC in our... read more »
Close window
Performance Parts MX-5 NC (2006-2015)

The MX-5 NC is the third generation of the popular Mazda roadster range. For this generation, too, we offer all the components and kits that you need to convert and modify your MX-5 NC in our performance parts shop. Turbo kits to increase performance, short shifters, exhaust systems and many other components are waiting in the categories to be discovered by you!

1 From 26
No results were found for the filter!
NEW
Hella Superseal connector kit for 2-pin connections
Hella Superseal connector kit for 2-pin...
Superseal connector kit from Hella for 2-pin plug connections. The connector kit is characterized by a secure and watertight connection of the connection, which means that applications outside and in the engine compartment are no...
€7.74 *
See details
15% Saved
NEW
Wheel bearing MX-5 NC rear axle FAG
Wheel bearing MX-5 NC rear axle FAG
FAG wheel bearing suitable for MX-5 NC on the rear axle. The wheel bearing can be replaced as a directly without any modification. We recommend replacing both wheel bearings on the rear axle in one go.
€105.23 * €123.80 *
See details
Prosport wiring loom for oil pressure sensor for premium series
Prosport wiring loom for oil pressure sensor...
Connection wiring loom suitable for Prosport fuel/oil pressure sensors as a replacement or for connecting a CanChecked. One end of the cable fits directly onto the Prosport oil pressure sensor. The other side is suitable for the...
€13.72 *
See details
Thread machining tap for oil return fitting 3/8" NPT
Thread machining tap for oil return fitting...
Thread machining tap suitable for the oil return of our turbo kits in 3/8" NPT. With this tap you can easily drill the thread for the oil return of the turbocharger in the oil pan. Please note that older kits from us had a different oil...
€41.73 *
See details
Belt slider 50mm for 4-point harness
Belt slider 50mm for 4-point harness
Triple bar slider / belt slider for looping belts with a width of 50mm. With these belt sliders, loop belts can easily be looped on our harness bars. Simply loop out the original attachment points (usually provided with a screw eyelet)...
€2.06 *
See details
Stack Boost gauge 52mm black
Stack Boost gauge 52mm black
52 mm additional instrument with stepper motor, boost pressure -1 to 2.0 bar. Thread: T-piece (sensor connection Ø 6 mm with connecting hose + T-piece 6.5 mm) Microprocessor controlled stepper motor 270° dial for the best possible...
€315.43 *
See details
Stack OIl temperature gauge black 52mm
Stack OIl temperature gauge black 52mm
52 mm additional instrument with stepper motor, oil temperature 40-140°C. Thread: 1/8NPTF Microprocessor controlled stepper motor 270° dial for the best possible readability Maintenance-free LED backlight Including high-quality sensors...
€196.27 *
See details
Stack analogue clock black 52mm
Stack analogue clock black 52mm
52 mm additional instrument with stepper motor, analogue clock Microprocessor controlled stepper motor 270° dial for the best possible readability Maintenance-free LED backlight Color: Black
€147.37 *
See details
Dirko HT Profipress sealant
Dirko HT Profipress sealant
Dirko HT Profipress permanently elastic engine sealant from Elring. The 200ml pump tube is practical for all work where flange connections with flat surfaces have to be connected absolutely tightly and without any leakage on the engine....
€20.00 *
See details
Oil adapter with 0,9mm restrictor for Garrett GT-series
Oil adapter with 0,9mm restrictor for Garrett...
The Oil Restrictor is mandatory for every ball bearing Turbochargers GT25 up to GT35 with Engines with more than 3bar Oil pressure at full throttle. Without the Restrictor a bearing damage will happen soon! The adapter has at...
€11.27 *
See details
Sandtler 4-point harness SPONSOR with ECE approval
Sandtler 4-point harness SPONSOR with ECE approval
Sandtler sports 4-point harness with ECE approval in many different colors. Type-approved according to European standard ECE 16.08. 3" shoulder harness with lightweight aluminum adjuster 2" lap harness with steel adjuster Shoulder and...
€163.77 *
See details
Seat Recaro Classic Pole Position ABE
Seat Recaro Classic Pole Position ABE
With the Classic Pole Position series, Recaro combines a classic look with the latest safety standards. Thanks to the Classic Pole Position, drivers no longer have to make the compromise of a modern look in their historic classic, but...
€1,854.00 *
See details
1 From 26
Viewed