Top seller
No results were found for the filter!
Vacuum hose 4.5mmx9mm black/red Vacuum hose for 4mm hose connection to connect the intake manifold to the MAP sensor, for example on an MS3 Mini. Also suitable for connecting the blowoff, wastegate and turbocharger. We ourselves use the vacuum hose in all of our turbo...
€9.52 *
Banjo bolt Short version of the classic banjo bolt for hydraulic or pneumatic lines.
From €2.09 *
Banjo fitting Classic banjo fitting for banjo bolts with push-on hose connector for hydraulic or pneumatic connections. E.g. suitable for oil and water lines.
From €3.15 *
Turbo Heat Shield for Turbos with T25 flange So called turbo nappies are preformed shields which are simply put on a turbocharger exhaust housing so the emerging temperatures can be kept inside the exhaust housing and don't burden the rest of the components in the engine bay....
€115.35 *
Heat Protection For Exhaust pipes This heat protection sheet has been developed to be fixed directly to the exhaust pipes. The sheets surface facing to the exhaust pipe is made of the same fire proof TITANIUM fabric as our heat wraps withstanding up to 700°C. This sheet...
From €62.33 *
Heat Protection Tube Closed Premium heat deflective tube. Aluminized to deflect heat radiation up 1000°C. For installation of this version the hoses and cables to be protected have to be removed and sheathed.
From €17.92 *
Heat Protection for Starter Motor Aluminized mantlet protects the starter from extreme temperature conditions. Protects the sensitive starter from heat radiation.
€49.43 *
Catch Can Extension with activated carbon canister Catch Can extension with activated carbon canister for existing SPS Catch Can, suitable for MX-5 NA/NB/NBFL. The extension makes it possible to direct the tank ventilation into a separate container, which is filled with activated carbon....
€104.89 *
Thread adapter Dash 08 ORB to Dash 06 black Thread adapter from Dash 08 ORB to Dash 06. The thread adapter is made of aluminum and black anodized. Ideal for connecting Dash 06 fuel pressure regulators to a Radium Fuel Rail, as these are usually equipped with Dash 08 ORB connectors.
€6.09 *
Push-on connector Dash 06 90° Hose push-on fitting with Dash 06 female thread. The hose connector has a 90° hose connector and is suitable for Dash 06 rubber hoses (inner diameter 9.6mm). The connector is made of aluminum and black anodized.
€15.67 *
Silicone adapter ring 76-60mm Silicone adapter ring with 76mm outer diameter and 60mm inner diameter. We ourselves use this adapter ring in our airbox kits to adapt the diameter of our airbox molded hose to the turbocharger.
€1.23 *
Long socket 1/2 inch SW12 12-point Long socket with 1/2 inch drive and 12mm wrench size. We ourselves use this long socket for many purposes, but mainly for tightening the OEM cylinder head bolts.
€24.23 *