Top seller
No results were found for the filter!
Pulsar PSR2860 GEN2 T25 0.64AR Our new official Stage 2 turbocharger! Modeled on the Garrett GT2860, you can find everything your performance-enhanced heart desires at Pulsar! With the 0.5 bar pressure can, the turbocharger looks great in any engine compartment. Here...
€899.99 *
Garrett GBC17-250 Turbo 0.50 A/R - T25 WG Garrett GBC17-250 with 0.50 A/R, T25 exhaust flange and internal wastegate. Popular and well-known from our turbo kits. 36mm compressor inducer Forged fully-machined compressor wheel GTX Gen II compressor aero with modern gasoline...
€884.99 *
Garrett GBC22-350 Turbo 0.64 A/R - T25 WG Garrett GBC22-350 with 0.64 A/R, T25 exhaust flange and internal wastegate. Popular and well-known from our turbo kits. 44mm compressor inducer Forged fully-machined compressor wheel GTX Gen II compressor aero with modern gasoline...
€949.99 *
Garrett GBC20-300 Turbo 0.55 A/R - T25 WG Garrett GBC20-300 with 0.55 A/R, T25 exhaust flange and internal wastegate. Popular and well-known from our turbo kits. 36mm compressor inducer Forged fully-machined compressor wheel GTX Gen II compressor aero with modern gasoline...
€899.99 *
Copper seal ring 12mm Copper seal ring for connecting banjo bolts with 12mm diameter.
€0.26 *
Banjo bolt M12x1,5 Banjo bolt with M12x1.5. Ideal for connecting the oil feed line on the cylinder head at MX-5 NC to the turbocharger using our oil feed line.
€2.11 *
Vacuum hose 4.5mmx9mm black/red Vacuum hose for 4mm hose connection to connect the intake manifold to the MAP sensor, for example on an MS3 Mini. Also suitable for connecting the blowoff, wastegate and turbocharger. We ourselves use the vacuum hose in all of our turbo...
€9.50 *
Banjo bolt Short version of the classic banjo bolt for hydraulic or pneumatic lines.
From €2.33 *
Banjo fitting Classic banjo fitting for banjo bolts with push-on hose connector for hydraulic or pneumatic connections. E.g. suitable for oil and water lines.
From €3.46 *
Conrod set Duratec 1,8/2,0L MX-5 NC Connecting rod set suitable for Mazda MX-5 NC 1.8 and 2.0L Duratec for use in performance-enhanced engines. Connecting rod length: 146.25 mm / ≈ 5.75788 in. Material: Forged 4340 EN24 (40CrNiMo) chrome molybdenum steel Weight tolerance:...
€545.00 *
Turbo Heat Shield for Turbos with T25 flange So called turbo nappies are preformed shields which are simply put on a turbocharger exhaust housing so the emerging temperatures can be kept inside the exhaust housing and don't burden the rest of the components in the engine bay....
€119.99 *
Heat Protection For Exhaust pipes This heat protection sheet has been developed to be fixed directly to the exhaust pipes. The sheets surface facing to the exhaust pipe is made of the same fire proof TITANIUM fabric as our heat wraps withstanding up to 700°C. This sheet...
From €79.99 *