Top seller
No results were found for the filter!
Link connector and pin kit A Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only. Suitable for: All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme) Link G4+ Atom (NB: Does NOT suit the earlier G4 Atom...
€49.98 *
Link XS Extension Cable (XSL) Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is...
€49.98 *
Link EGT Sensor Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test &...
€154.99 *
MAP1.15 Sensor and plug L The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar...
€144.99 *
Link CAN Gauge OLED 52mm The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can be...
€399.00 *
Link 4 key CAN Keypad Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately). Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups. The keypad is designed for ultimate reliability -...
€329.99 *
Link IGN1A - Smart Coil incl. Connector Kit High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge Built-in ignitor with external heat sink Requires HEI-type plug wire ends/...
€104.99 *
TCC04 4 Channel EGT to CAN Module Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device....
€264.99 *
Link G4X FuryX FuryX Der FuryX ist ein Premium-ECU wie der XtremeX, jedoch mit zusätzlicher Onboard-Digital-Breitband-Lambda-Regelung. Jetzt auf der G4X-Plattform bietet der FuryX einen schnelleren Prozessor, schnellere Kommunikation und riesige 512...
€2,379.00 *
Link G4X StormX Advanced tuning features at an affordable price. The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines with...
€1,839.00 *
Link Razor Triple Bundle Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup. The Razor PDM...
€2,799.00 *
Link RACEPAD – CAN Lenkradtastenfeld RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8 easy-to-reach buttons, RacePad is the ideal addition to any race car, enabling both...
€1,074.00 *