Top seller
Single registration in our house
Single registration in our house
No results were found for the filter!
Rear Counterweight 83-85 12A NOTE: N226-11-751A (83-85 12A) counterweights have been discontinued by Mazda. This item is a 13B counterwieght machined and balanced to the 83-85 12A rotating assembly. We took a few pair of 83-85 12A rotors, weighed them all for an...
€359.99 *
Rear Counterweight 86-88 ALL Rear Counterweight - 1986-88 ALL Engines - All automatic transmission-configured Mazda rotary engines are equipped with a rear counterweight as shown. The counterweight serves as both a critical engine balancing component and as an...
€564.99 *
Rear Counterweight 89-95 All Rear Counterweight - 1989-95 13B ALL Engines - All automatic transmission-configured Mazda rotary engines are equipped with a rear counterweight as shown. The counterweight serves as both a critical engine balancing component and as an...
€485.00 *
Racing Beat - Auto Transmission Counter Weight... The Automatic Transmission Counter Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used...
€174.99 *
Rubber Exhaust Hanger - Muffler Rear 93-95 RX-7 These genuine Mazda RX-7 exhaust hangers can be used to replace the old, worn original rubber hangers on your RX-7. If you are installing a new exhaust system it is worth considering the replacement of the original hangers to ensure that...
€89.99 *
Rubber Exhaust Hanger - Muffler Front 93-95 RX-7 This genuine Mazda RX-7 exhaust hanger can be used to replace the old, worn original rubber hanger the muffler inlet pipe on your RX-7. If you are installing a new exhaust system it is worth considering the replacement of this original...
€79.99 *
Racin Beat - Exhaust Hanger Support - Metal... These hangers were used by Mazda on the early 1979-85 RX-7 mufflers as part of a "rubber hanger/metal hanger" combination to secure the muffler to the chassis. While this arrangement was rather bulky and required multiple components, it...
€54.99 *
Complete Exhaust Hanger Kit 86-92 ALL (MT) Tire, old rubber hangers may the source of potential trouble for the exhaust system on your RX-7! We have found that with age, the rubber hangers that support the exhaust components can deteriorate, crack and fail. This results in...
€399.99 *
Mini Presilencer 79-80 RX-7 Racing Beat Mini Power Pulse Presilencer This short version of our rotary presilencer was orignally designed for use our header on the 1979-80 RX-7, but has since become valuable for rotary owners looking for solutions to a challenging...
€464.99 *
Engine-to-Exhaust Manifold Gasket 93-5 RX-7 We offer the Mazda OEM high temperature gasket (Mazda Part Number N3A1-13-461) that is "sandwiched" between the Engine and the Turbocharger Manifold on the 1993-95 Twin Turbo RX-7 at an extremely attractive price: less than half the...
€284.99 *
NGK Wire Set 1993-95 RX-7 The NGK wire set for the RX-7 offers an economical replacement for a set of old, wore wires. The NGK spark plug wire set for the RX-7 features a 7mm ultra-low resistance magnetic core cable with OEM-style spark plug and distributor...
€109.99 *
Racingbeat Phenolic Intake Spacer 48 IDA & 51... The Weber 48/51 IDA Phenolic Intake Spacers can be installed under a 48/51 IDA carburetor to increase the intake manifold length for special applications. Test have shown that up to three spacers per barrel can be used to move the torque...
€74.99 *