info@sps-motorsport.com
Versand innerhalb von 24h*
info@sps-motorsport.com
Hotline 06432 6409960
 
1 From 8
No results were found for the filter!
Link Universal Wiring Harness A Loom Long (5m) e.g. Link Atom G4X Link Universal Wiring Harness A Loom Long (5m)...
5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match...
€238.00 *
See details
Link Universal Wiring Harness B Loom Long (5m) e.g. Link Atom G4X Link Universal Wiring Harness B Loom Long (5m)...
5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match...
€238.00 *
See details
Link Air Temp Sensor (IAT1-8) Link Air Temp Sensor (IAT1-8)
Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
€87.99 *
See details
Link Knock Sensor (KNS) Link Knock Sensor (KNS)
Donut style 8mm hole Includes plug and pin kit
€119.00 *
See details
Link connector and pin kit A Link connector and pin kit A
Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only. Suitable for: All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme) Link G4+ Atom (NB: Does NOT suit the earlier G4 Atom...
€49.98 *
See details
Link XS Extension Cable (XSL) Link XS Extension Cable (XSL)
Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is...
€49.98 *
See details
Link EGT Sensor Link EGT Sensor
Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test &...
€154.99 *
See details
MAP1.15 Sensor and plug L MAP1.15 Sensor and plug L
The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar...
€144.99 *
See details
Link IGN1A - Smart Coil incl. Connector Kit Link IGN1A - Smart Coil incl. Connector Kit
High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge Built-in ignitor with external heat sink Requires HEI-type plug wire ends/...
€104.99 *
See details
TCC04 4 Channel EGT to CAN Module TCC04 4 Channel EGT to CAN Module
Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device....
€264.99 *
See details
Link Razor Triple Bundle Link Razor Triple Bundle
Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup. The Razor PDM...
€2,799.00 *
See details
Link RACEPAD – CAN Lenkradtastenfeld Link RACEPAD – CAN Lenkradtastenfeld
RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8 easy-to-reach buttons, RacePad is the ideal addition to any race car, enabling both...
€1,074.00 *
See details
1 From 8
Viewed