Top seller
No results were found for the filter!
Dirko HT Profipress sealant Dirko HT Profipress permanently elastic engine sealant from Elring. The 200ml pump tube is practical for all work where flange connections with flat surfaces have to be connected absolutely tightly and without any leakage on the engine....
€20.00 *
Oil adapter with 0,9mm restrictor for Garrett... The Oil Restrictor is mandatory for every ball bearing Turbochargers GT25 up to GT35 with Engines with more than 3bar Oil pressure at full throttle. Without the Restrictor a bearing damage will happen soon! The adapter has at...
€11.27 *
Engine oil drain plug with sensorhole 1/8"NPT Drain plug for engine oil with pre-drilled sensor hole in 1/8 "NPT. Fits MX-5 NA/NB/NBFL/NC and ND. Usually the 115 PS NAs have the screws with a cone, all others have the screw variant without a cone. Before ordering, however, you...
From €26.88 *
Radium PCV Baffle Plate MX-5 NC PCV Baffle plate by Radium suitable for MX-5 NC 1.8 and 2.0 liter engines. The Baffle plate is screwed to the engine block below the intake manifold and replaces the factory plastic PCV plate. Compared to the factory part, the...
€192.45 *
SPS Motorsport Catch Can Kit MX-5 NC Our own catch can is finally here! The Catch Can filters oil mist and condensed water from the intake, which means you always have a clean intake that is not clogged by oil mist. The baffle inside prevents oil and condensation from...
€253.58 *
Nord-Lock washer Nord-Lock washer, perfectly suitable for additional screw locking for screw connections on the turbocharger and turbo elbow. Through their locking teeth on both sides, the washers offer the best possible protection against loosening of...
From €0.45 *
Engine oil drain plug sealing MX-5 Aluminum sealing ring from Würth with the dimensions 14x20x1.5mm. We use the sealing ring for the oil drain plug of the MX-5 NA / NB / NC / ND on every occasion. Ideally suited for planned inspections or similar, for which you can also...
€0.39 *
Oil Filter Adapter D1 Spec 3/4" thread The oil filter adapter from D1 Spec offers you three ways to connect various display instruments for the interior of the vehicle, such as. Oil pressure instruments or oil temperature instruments. It is screwed directly between the oil...
€33.86 *
Oil pressure / fuel pressure sensor for... The Prosport oil pressure or fuel pressure sensor has been specially designed for the Premium series and can be used for both. The new plug-in connection with safety clip prevents moisture or dirt from getting between the contacts. The...
€56.93 *