Top seller
No results were found for the filter!
Oil pressure gauge Classic 52mm High-quality oil pressure gauge from Prosport. With this display instrument from the Classic series you can tune your vehicle professionally. Prosport has stood for high-quality tuning in the scene for years. With the Classic series it...
€69.16 *
CANchecked CAN Bus Extension Module MCE18 MCE18 stands for Multifunction Can Bus Extension with 18 ports - why is this module needed? Our displays (MFD28, MFD32, MFD32S) have four analog inputs. However, for some applications this may already be too few and more inputs are...
€204.99 *
OBDLink SX 425801 USB: OBD-II wire OBD to USB cable for connecting a laptop to the vehicle's OBD system. Used to play VersaTune on a vehicle, for example.
€90.99 *
Spark plug IXEH22TT MX-5 ND Denso spark plug suitable for MX-5 ND with the identifier IXEH22TT. CAUTION! For a four-cylinder engine, 4 items are required. Wrench size: 14mm Thread length: 26.5mm Diameter: 12mm Tightening torque: 17Nm
€26.48 *
Versatune Package 2.0L MX-5 ND G160 This complete package for your MX-5 ND 2.0L G160 consists of a VersaTuner Lite license , an OBD connection cable and the Tune made by SPS Motorsport adapted for the conversion. You can select Your conversion stage in the dropdown menu,...
€530.64 *
CANchecked operating knob / MFD15 encoder The operating knob, already known from generation 1 of the MX-5 NC and ND CANchecked displays, is only optionally available in generation 2. With Generation 2, the CANchecked is operated using the two pushbuttons directly on the display...
€41.78 *
CANchecked MFD15 OBD2 MX-5 ND Gen2 The new generation CANchecked is here! With this multifunction display, you won't miss any value, and everything at a glance! Thanks to the new development , the following functions are covered: WLAN Connect via smartphone enables...
€374.99 *
Hella Superseal connector kit for 2-pin... Superseal connector kit from Hella for 2-pin plug connections. The connector kit is characterized by a secure and watertight connection of the connection, which means that applications outside and in the engine compartment are no...
€7.74 *
Prosport wiring loom for oil pressure sensor... Connection wiring loom suitable for Prosport fuel/oil pressure sensors as a replacement or for connecting a CanChecked. One end of the cable fits directly onto the Prosport oil pressure sensor. The other side is suitable for the...
€13.72 *
Sensor for oil temperature gauge 50-150°C Temperature sensor for VDO oil temperature gauge with 1/8" NPT thread. Measuring range: +50 - +150°C Thread: 1/8" NPT Resistance values: 322.8 - 18.6 ohms Output: 1-pin via ground
€25.66 *
Sensor for VDO Oil pressure gauge 0-5 bar /... VDO oil pressure sensor with a range of 0-5 bar and a warning contact at 0.25 bar. Measuring range: 0-5 bar Thread: 1/8" NPT conical short Resistance values: 10-184 ohms Output: 1-pin via ground Warning contact: 0.25 bar ± 0.15 bar
€101.55 *
Assembly set for CANchecked MX-5 NC and ND Assembly set for CANchecked Displays for MX-5 NC and ND to install engine oil temperature. With this assembly set, the engine oil temperature can be fed into the CANchecked module via an analog input. If this set is not used, the...
€69.20 *