SPS Crossflow Radiator MX-5 NA

We finally have our own radiators!

This radiator is suitable for Mazda MX-5 NA. In subtle black, it makes every MX-5 NA engine compartment an absolute eye-catcher. In our intensive tests, we were able to achieve very good cooling results compared to competing products thanks to the crossflow net, in order to ensure that the motor remains cool even under higher loads. We recommend this radiator for 20% street use and up to 80% track use on built engines over 350hp.

The water boxes of the radiator are fully welded and not jammed like the original radiator. With original radiators, the water boxes tend to leak. The thickness of the water cooler is 7.6 cm and is therefore ideal for high-performance vehicles.

Of course, the cooler is attached to the original mounting points and can therefore be plug and play mounted. There may be adjustment work on the original fan. The piping of the radiator lines must also be changed, since the connections on the radiator are offset from the original connections.

All in all, we offer a radiator that is recommended for all vehicles that are only used on the racetrack.

CAUTION! The installation of our fan shroud kit and fan shroud kits from Mishimoto is not possible because the radiator is much thicker than the original or our standard aluminum radiator. Before installing, please check whether the lower drain plug is tightened and, if necessary, tighten it carefully.

.