CANchecked MFD GEN2 MX-5 NB/NBFL

The new generation CANchecked is here! With this multifunction display, you won't miss any value, and everything at a glance!

Thanks to the new development, the following functions are covered:

• WLAN Connect via smartphone enables configuration of the display/widgets/sensors as well as updates
• Improved graphics with better anti-aliasing
• Two buttons on the side directly on the display - there is no need to lay the cable or drill for the operation knob
• The widgets can be adjusted more precisely
• New warning popup features
• 6 analogue inputs instead of 4
• Optional logging via smartphone
• Freely definable Can Bus protocol (TRI files as with the MFD28/32)
• Can bus switching / analog forwarding for specific control units

Of course, the key features from generation 1 are also available:

• 1.5" inch OLED display with standard 52mm round instrument dimensions (like VDO displays)
• Super flat design - only 12.5mm deep
• Perfect integration into the vehicle interior thanks to the adapter ring for the dashboard ventilation panel
• Up to eight different display windows can be freely configured using WLAN Connect and a smartphone
• Control unit values can be displayed (connection via OBD 2 socket (cable is included)
• Up to 64 sensors can be queried, querying the sensors like manufacturer diagnostic tools
• 6 analogue inputs for 0-5V or NTC sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature (with adapter), boost pressure, ethanol sensor with additional license), oil temperature, water temperature
• Up to six sensors/values can be shown simultaneously in a display window
• Integrated LED shift light/warning lamp
• Individual minimum, maximum and pop-up function when exceeding or falling below warning values
• Integrated shift light
• Can be operated via OBD2, UDS (and as "standalone" with analogue sensors).
• Online log function
• Performance meter (e.g. measures the time from 0-100 and 100-200 km/h - can also be switched to mph)

The following data can be read out via the CANchecked (depending on the vehicle) and displayed graphically:

• Temperatures: engine water temperature, intake temperature, exhaust gas temperature, transmission temperature
• Pressures: boost pressure, ambient pressure, oil pressure
• Lambda/mixture: Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque
• Driver dynamics: brake pressure, vehicle speed, throttle angle/accelerator pedal position
• Other: RPM, total ignition angle, gear, battery voltage, ignition angle retard for each cylinder
• Analogue inputs: additional sensors can be added here: oil temperature, fuel pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (flex fuel) and many more

Scope of delivery:

• CANchecked MFD15 GEN 2 OBD2 OLED multi display
• Vehicle-specific installation panel
• CANchecked knob for comfortable operating
• Quick Start Guide
• OBD2 cable
• Connector B (6-way)
• Connector C (12-way)
• 20cm pre-crimped connection cable for power supply, CAN bus, analog inputs, 5V and sensor ground
• Pins to crimp yourself
• two 1K resistors (for pullup for NTC sensors)

CAUTION! Reading out sensor data via CAN bus can only be used with a standalone ECU with CAN bus function! With OEM ECUs, the CANchecked can only read and display analog sensors.