Pierburg CWA200 electric water pump incl. plug kit

Pierburg CWA200 electric water pump for use in motorsport vehicles or vehicles with very high thermal loads. An electric water pump enables constant cooling regardless of the engine speed. As a result, the vehicle no longer overheats when the vehicle is stationary, where the pumping capacity of the mechanical water pump is at its lowest. In addition, depending on the electrical circuit, after-cooling can be achieved after the engine has been switched off, since the electric water pump can continue to circulate the coolant in the cooling system without engine speed. The dimensions of the pump are 44x44x12mm.

The advantages of the Pierburg electric water pump as an overview:

• Robust and innovative design
• Brushless canned motor
• Integrated variable speed controller
• Controllable via PWM
• Reliable and maintenance free
• High delivery rates

Pierburg CWA200

Pierburg was the world's first series-production supplier of an electric coolant pump to BMW.
With matched cooling demand and supply a reduced fuel consumption was easily achieved.
Suitable for engine cooling in combustion engine vehicles and cooling of bigger systems in electrical vehicles.

Specifications:

• Name: "Pierburg CWA200"
• Operation voltage: 8-16 volts
• Weight: approx. 2.15 kg
• Current consumption: 15A (16.5A max.) / (approx. 0.2mA in standby mode)
• Nominal diff. pressure: 0.45 bar *
• Flow rate: ca. 116 l/min @ 0.45bar / 166 l/min @ 0.30bar
• Speed: approx. 4500 rpm
• Temperature range: -40°C – 128°C (water) / -40°C – 140°C (ambient)
• Protection: IP67